9
ENGLISH
INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING
INSTALLATION PROCEDURE
1
Open the package and make sure all the accessories are included.
2
Attach the stand to the TV set.
3
Connect an external device to the TV set.
4
Make sure the network connection is available.
You can use the TV network functions only when the network connection is made.
* When the TV is turned on for the first time after being shipped from the factory, initialization of the TV may
take approximately one minute.
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local dealer
where you purchased your product. The illustrations in this manual may differ from the actual product and
item.
•
Do not use any unapproved items to ensure the safety and lifespan of the product.
•
Any damages or injuries by using unapproved items are not covered by the warranty.
•
Some models appear to have a thin film on the screen. It is actually part of the screen; do not remove it.
CAUTION
•
The items supplied with your product may vary depending upon the
model.
•
Product specifications or contents of this manual may be changed
without prior notice due to upgrade of product functions.
•
For an optimal connection, HDMI cables and USB devices should have
bezels less than 10 mm thick and 18 mm width.
•
Use an extension cable that supports USB 2.0 if the USB cable or USB
flash drive does not fit into your TV’s USB port.
•
Use a certified cable with the HDMI logo attached. If you do not use a
certified HDMI cable, the screen may not display or a connection error may occur.
•
Recommended HDMI cable types (3 m or less)
- High-Speed HDMI
®
/
TM
Cable
- High-Speed HDMI
®
/
TM
Cable with Ethernet
NOTE
B
A
A
B
*A 10 mm
*B 18 mm
