ENGLISH
29
MAGIC REMOTE CONTROL FUNCTIONS
Registering Magic Remote Control
The Magic Remote Control operates by pairing with your TV.
Please register the remote as follows.
How to register the Magic Remote Control
(Wheel)
To register automatically, turn the TV on and press the
Wheel (OK)
. When registration is completed, the
completion message appears on the screen.
If registration fails, turn the TV off and back on, then
press the
Wheel (OK)
to complete registration.
How to Re-register the Magic Remote Control
BACK
SMART
1 Press and hold the
BACK
and
SMART
buttons together for 5 seconds to
reset, then register it by following “How to
register the Magic remote control” above.
2 To re-register the Magic remote control, press
and hold the
BACK
button for 5 seconds
toward the TV.
How to use Magic Remote Control
1 You can move the pointer by aiming the Pointer
Receiver of the remote control at your TV then
move it left, right, up or down.
»
If the pointer does not work properly leave the
remote control for 10 seconds then use it again.
2 If the pointer disappears, move the remote
control slightly to left or right. Then, it will
automatically appear on the screen.
»
If the pointer has not been used for a certain period
of time, it will disappear.
1
If you press
Wheel (OK)
on the Magic remote control,
the screen appears.
Shows information about the current program and
screen.
2
You can select More Menu.
Precautions to Take when Using the
Magic Remote Control
y
Use the Magic remote control within the maximum
communication distance (10 m). Using the remote control
beyond this distance, or with an object obstructing it, may
cause a communication failure.
y
A communication failure may occur due to nearby devices.
Electrical devices such as a microwave oven or wireless
LAN product may cause interference, as these use the same
bandwidth (2.4 GHz) as the Magic remote control.
y
The Magic remote control may be damaged or may
malfunction if it is dropped or receives a heavy impact.
y
Take care not to bump into nearby furniture or other people
when using the Magic remote control.
y
Manufacturer and installer cannot provide service related to
human safety as the applicable wireless device has possibility
of electric wave interference.
y
It is recommended that an Access Point (AP) be located more
than 1 m away from the TV. If the AP is installed closer than
1 m, the Magic remote control may not perform as expected
due to frequency interference.
