26 Plasma Monitor
Screen Adjustment
- If the image still isn’t clear after auto adjustment and especially if characters are still jittery, adjust the picture Phase
manually.
- To correct the screen size, adjust
Clock
.
- This function works in the following mode : RGB, COMPONENT, HDMI-DTV(480p, 720p,1080i).
- It’s not available to use Phase, Clock function in RGB, COMPONENT, HDMI-DTV (480p, 720p,1080i) mode.
1. Press the
MENU
button and then use
D
D
/
E
E
button to select the
SCREEN
menu.
2. Press the
G
G
button and then use
D
D
/
E
E
button to select
Manual config.
.
3. Press the
G
G
button and then use
D
D
/
E
E
button to to select
Phase
,
Clock
,
H-Position
or
V-Position
.
4. Use the
F
F
/
G
G
button to make appropriate adjustments.
• The
Phase
adjustment range is 0 ~ 63.
• The
Clock
adjustment range is -20 ~ +50.
5. Press the
ENTER
button to save.
- RGB (PC) mode only; This function doesn’t work for RGB (DTV) mode.
- Automatically adjusts picture position and minimizes image shaking.
- After adjustment, if the image is still not correct, your set is functioning properly but needs further adjustment.
- The
Auto config.
and
Manual config.
are not active in HDMI mode.
1. Press the
MENU
button and then use
D
D
/
E
E
button to select the
SCREEN
menu.
2. Press the
G
G
button and then use
D
D
/
E
E
button to select
Auto config.
.
3. Press the
G
G
button to run Auto configure.
• When
Auto config.
has finished,
OK
will be shown on screen.
• If the position of the image is still not correct, try Auto adjustment again.
4. In RGB (PC) mode, if the image needs to be adjusted more after using
Auto
config.
, you can make further adjustments with the
Manual config.
option.
- Caution: If a 4:3 fixed image is on the screen for a long time, it may remain visible.
- Set every aspect ratio for Video, Component 480i sources.
- Use 4:3 or 16:9 for other RGB(PC), HDMI(PC) sources.
- Horizon is not available for RGB (DTV), HDMI (DTV), and Component (DTV) sources.
1. Press the
ARC
button repeatedly to select the desired picture format. You can also adjust
ARC
in the
SCREEN
menu.
•
4:3
Choose
4:3
when you want to view a picture with an original 4:3 aspect ratio, with black bars appearing at both the left and right sides.
•
16:9
Choose
16:9
when you want to adjust the picture horizontally, in a linear proportion to fill the entire screen.
•
Horizon
Choose
Horizon
when you want to adjust the picture in a non-linear proportion, that is, more enlarged at both sides, to create
a spectacular view.
•
Zoom
- Choose
Zoom
when you want to view the picture without any alteration. However, the top and bottom portions of the picture will be cropped.
SCREEN
Prev.
Auto config.
G
G
Manual config.
VGA Mode
ARC
Zoom +/-
Position
Cinema
NR
Reset
SCREEN
MENU
To set
SCREEN
Prev.
Auto config.
Manual config.
G
G
VGA Mode
ARC
Zoom +/-
Position
Cinema
NR
Reset
SCREEN
MENU
Phase
0
Clock
0
H-position 0
V-position 0
Screen Adjustment
Auto
Auto
Adjustment
Adjustment
Setting Picture Format
Setting Picture Format
Manual Configure
Manual Configure
U514Aen 97/10/26 3:11 AM Page 26
