LG 50PC1M Series, Руководство пользователя

Страница: 24 / 36

24 PLASMA TV
Miscellaneous
Transmission
* [Command 1]
: First command to control Plasma
Monitor set.
(j, k, m or x)
* [Command 2]
: Second command to control Plasma
Monitor set.
* [Set ID]
: You can adjust the set ID to choose
desired monitor ID number in special
menu. Adjustment range is 1 ~ 99.
When selecting Set ID ‘0’, every connected
Plasma Monitor set is controlled.
Set ID is indicated as decimal (1~99) on
menu and as Hexa decimal (0x0~0x63)
on transmission/receiving protocol.
* [DATA]
: To transmit command data.
Transmit ‘FF’ data to read status of
command.
* [Cr] :
Carriage Return
ASCII code ‘0x0D’
* [ ]
: ASCII code ‘space (0x20)’
[Command1][Command2][ ][Set ID][ ][Data][Cr]
OK Acknowledgement
* The set transmits ACK (acknowledgement) based on this
format when receiving normal data. At this time, if the
data is data read mode, it indicates present status data. If
the data is data write mode, it returns the data of the PC
computer.
[Command2][ ][Set ID][ ][OK][Data][x]
Error Acknowledgement
* The set transmits ACK (acknowledgement) based on this
format when receiving abnormal data from
non-viable functions or communication errors.
[Command2][ ][Set ID][ ][NG][Data][x]
Transmission / Receiving Protocol
Command Reference List
* When setting the 24 ~ 31, a menu doesn’t display on screen.
Data 1: Illegal Code
2: not support function
3: Wait more time
01. Power k a 0 ~ 1
02. Input Select k b Refer to p. 25
03. Aspect Ratio k c Refer to p. 25
04. Screen Mute k d 0 ~ 1
05. Volume Mute k e 0 ~ 1
06. Volume Control k f 0 ~ 64
07. Contrast k g 0 ~ 64
08. Brightness k h 0 ~ 64
09. Colour k i 0 ~ 64
10. Tint k j 0 ~ 64
11. Sharpness k k 0 ~ 64
12. OSD Select k l 0 ~ 1
13. Remote control lock mode k m 0 ~ 1
14. PIP/DW k n Refer to p. 26
15. PIP Position k q 0 ~ 3
16. Treble k r 0 ~ 64
17. Bass k s 0 ~ 64
18. Balance k t 0 ~ 64
19. Colour Temperature (CSM) k u 0 ~ 3
20. Red Adjustment k v 0 ~ 50
21. Green Adjustment k w 0 ~ 50
22. Blue Adjustment k $ 0 ~ 50
23. PIP input Select k y Refer to p. 27
24. Abnormal Status k z 0 ~ a
25. ISM Method j p 0 ~ 3
26. Low Power j q 0 ~ 1
27. Orbiter Time Setting j r 1 ~ FE
28. Orbiter Pixel Setting j s 1 ~ 3
29. Picture Size j t 0 ~ 20
30. Auto Configure j u 1
31. Send IR Code m c Key Code
COMMAND 1 COMMAND 2 DATA
(Hexadecimal)
Set ID
- Use this function to specify a set ID number.
- Refer to ‘Real Data Mapping 1’. See page 28.
1. Press the MENU button and then use
D D
/
E E
button to select the SPECIAL menu.
2. Press the G G button and then use
D D
/
E E
button to select Set ID .
3. Press the G G button and then use F
/
G button to adjust Set ID to choose the desired
monitor ID number.
• The adjustment range of Set ID is 1 ~ 99.
4. Repeatedly
press the
MENU
button to return to normal viewing.
• Baud rate : 9600 bps (UART)
• Data length : 8 bits
• Parity : None
* Use a crossed (reverse) cable. • Stop bit : 1 bit
• Communication code : ASCII code
Communication Parameters