11
ENGLISH
Using Magic Remote Control
(Depending on model)
The descriptions in this manual are based on the buttons on the remote
control. Please read this manual carefully and use the TV correctly.
When the message [Magic remote battery is low. Please change the
battery.] is displayed, replace the batteries.
To install batteries, open the battery cover, replace batteries (1.5 V AA)
matching the and ends to the label inside the compartment,
and close the battery cover. Be sure to point the magic remote toward
the remote control sensor on the TV. To remove the batteries, perform
the installation actions in reverse. This remote uses infrared light. When
in use, it should be pointed in the direction of the TV’s remote sensor.
1
1
1
(Some buttons and services may not be provided depending on models
or regions.)
** To use the button, press and hold for more than 1 second.
(POWER)
Turns the TV on or off.
(STB POWER)
You can turn your set-top box on or off by adding
the set-top box to the universal remote control for your TV.
Number buttons
Enters numbers.
**
Accesses the [QUICK HELP].
(DASH)
Inserts a between numbers such as 2-1 and 2-2.
**
(DASH)
Enter data broadcast.
Accesses the saved channels list.
(MORE ACTIONS)
Displays more remote control functions.
**
Edits QUICK ACCESS.
-
QUICK ACCESS is a feature that allows you to enter a specified app
or Live TV directly by pressing and holding the number buttons.
**
SAP (Secondary Audio Program) Feature can also be
enabled by pressing the button.
Adjusts the volume level.
(MUTE)
Mutes all sounds.
**
(MUTE)
Accesses the [Accessibility] menu.
Scrolls through the saved channels.
**
(Voice recognition)
Network connection is required to use the
voice recognition function. Once the voice display bar is activated on
the TV screen, press and hold the button and speak your command
out loud.
(HOME)
Accesses the Home menu.
**
(HOME)
Shows the previous history.
(Q. Settings)
Accesses the Quick Settings.
**
(Q. Settings)
Displays the [All Settings] menu.
Wheel (OK)
Press the center of the Wheel button to select a
menu. You can change channels by using the wheel button.
(up/down/left/right)
Press the up, down, left or right
button to scroll the menu. If you press buttons while the
pointer is in use, the pointer will disappear from the screen and Magic
Remote will operate like a general remote control. To display the
pointer on the screen again, shake Magic Remote to the left and right.
(BACK)
Returns to the previous screen.
**
(BACK)
Clears on-screen displays and returns to last input
viewing.
Displays the program event according to time scheduler.
1
Streaming Service buttons
Connects to the Video Streaming
Service.
(INPUT)
Changes the input source.
**
(INPUT)
Accesses the [HOME DASHBOARD].
,
,
,
These access special functions in some menus.
**
Runs the record function.
, (Control buttons)
Controls media contents.
