16
206-4325
EZ-Manager Wizard
Note:
After it is turned ON, the TV begins an initialization process, and it may take several minutes
for the EZ-Manager Wizard to appear.
The primary purpose of the EZ-Manager Wizard is to guide you through the process (automated or
manual) of configuring the essential Installer Menu items for Pro:Centric operation. The wizard will
appear on the screen each time the TV is turned ON, until one of its configuration methods has
been completed or the wizard is exited. Use the Installer Remote to make selections and complete
each wizard step.
While the EZ-Manager Wizard is intended primarily for Pro:Centric-related configuration, the
wizard also offers Zoning as well as USB configuration options.
•
UV570H/UV572H TVs support the TV Zoning feature, which enables location-specific
configurations (see Reference section, “Using the TV Zoning Feature,” for further information).
The EZ-Manager
Wizard enables you to set the TV Zone # in the TV as part of the configuration
process.
• The EZ-Manager Wizard also enables you to access the TV Manager / USB download options
as part of the configuration process, if desired, to perform USB configuration and/or update
functions.
Caution: Do NOT unplug the TV power cord or remove the antenna cable or, if
applicable, the LAN cable during the configuration process, as doing so will interrupt
the current step and may corrupt the configuration data.
Before You Begin
• If you plan to create a Master TV Setup using the procedure described on pages 41 to 43, be sure
to exit the EZ-Manager Wizard in order to avoid setting modes that may restrict the custom setup
procedure. See also “Initiate Configuration or Exit the EZ-Manager Wizard” below.
• If it has been completed or exited and therefore does not display, the EZ-Manager Wizard can
be reactivated; however, this requires that you restore the TV to a factory default condition. See
Reference section, “Restoring Factory Defaults on the TV(s),” for further information.
• Each wizard step is allotted a time frame after which the wizard proceeds without user interaction.
If the Pro:Centric server is configured on the system and if no location-specific settings are
required in the TV, for example, TV Zone, Label, and/or Room Number settings, you can simply
turn ON the TV, and once initiated, the wizard will proceed through each of the configuration steps
with no further user interaction.
•
If any of the configuration steps fails, you will see a “Diagnostics” screen with an indication of the
failure. You will then have the opportunity to reinitiate the configuration process from the previous
screen or exit the EZ-Manager Wizard.
