LG 43UU3 U Series, Руководство по установке

Страница: 12 / 33

ENGLISH
12
15Min Auto Off
(Depending on model)
• When ‘15Min Auto Off’ is set to ‘Enable’, TV will turn off if there is no signal in 15Min.
Auto Sensing
• If ‘Auto Sensing’ is set to ‘On’, the input is automatically switched when the input signal that you set to “ON’ is received.
• If ‘Auto Sensing’ is set to ‘Disable’, the input is not switched when the input signal is received.
- SIMPLINK and Auto Sensing cannot work simultaneously. If SIMPLINK is set to On, Auto Sensing is automatically set to Disable.
-
If the signal is removed while Auto Sensing (automatic input switch) is enabled, the input returns to the previous setting.
If the several input are connected by enabling Auto Sensing and the automatic input returns to the previous setting.
If the several inputs are connected by enabling Auto Sensing and the automatic input switch is performed several times, the input
returns to the previous setting only for the last input and does not repeat the operation for the rest.
DPM
(Depending on model)
• You can configure the DPM (Display Power Management) function.
• If this option is not set to Off, the TV set enters the DPM mode when there is no input signal.
• If you set this option to Off, the DPM function is disabled.
Sustain Aspect Ratio
(Depending on model)
• Sustain Aspect Ratio sets the power mode of the HDMI Switching IC, which detects HDMI external input signals in the TV Standby state after
DPM Power Off turns off the TV.
• If Sustain Aspect Ratio is set to ON, the HDMI Switching IC is supplied with power even in Standby state after DPM turns off the TV.
• If Sustain Aspect Ratio is set to OFF, the HDMI Switching IC maintains low power mode in Standby state after DPM turns off the TV.