background image

ENGLISH

5

If you intend to mount the product to a wall, attach VESA standard 
mounting interface (optional parts) to the back of the product. When 
you install the set to use the wall mounting bracket (optional parts), fix 
it carefully so as not to drop.

Only use the attachments / accessories specified by the manufacturer.

When installing the antenna, consult with a qualified service 
technician. If not installed by a qualified technician, this may create a 
fire hazard or an electric shock hazard.

We recommend that you maintain a distance of at least 2 to 7 times 
the diagonal screen size when watching TV.  If you watch TV for a long 
period of time, this may cause blurred vision.

Only use the specified type of battery.  This could cause damage to the 
remote control.

Do not mix new batteries with old batteries. This may cause the 
batteries to overheat and leak.

Batteries should not be exposed to excessive heat. For example, keep 
away from direct Sunlight , open fireplace and electric heaters .

Do not place non-rechargeable batteries in charging device.

Make sure there are no objects between the remote control and its 
sensor.

Signal from Remote Control can be interrupted due to external/internal  
lighting eg Sunlight, fluorescent lighting. If this occurs turn off lighting 
or darken viewing area.

When connecting external devices such as video game consoles, make 
sure the connecting cables are long enough.  Otherwise, the product 
may fall over, which may cause injury or damage the product.

Do not turn the product On/Off by plugging-in or unplugging the power 
plug to the wall outlet. (Do not use the power plug for switch.)  It may 
cause mechanical failure or could give an electric shock.

Please follow the installation instructions below to prevent the product 
from overheating.

•  The distance between the product and the wall should be more 

than 10 cm.

•  Do not install the product in a place with no ventilation (e.g., on a 

bookshelf or in a cupboard).

•  Do not install the product on a carpet or cushion.
•  Make sure the air vent is not blocked by a tablecloth or curtain.

Otherwise, this may result in fire.

Take care not to touch the ventilation openings when watching the TV 
for long periods as the ventilation openings may become hot. This does 
not affect the operation or performance of the product.

Periodically examine the cord of your appliance, and if its appearance 
indicates damage or deterioration, unplug it, discontinue use of the 
appliance, and have the cord replaced with an exact replacement part 
by an authorized servicer.

Содержание 43UF680T-TA









































Отзывы: