LG 43UF6407, Руководство пользователя

Страница: 19 / 72

ENGLISH
19
Euro scart connection
(Depending on model)
Transmits the video and audio signals from
an external device to the TV set. Connect the
external device and the TV set with the euro
scart cable.
Output Type
Current
input mode
AV1
(TV Out
1
)
Digital TV Digital TV
Analogue TV, AV
Analogue TV Component
HDMI
1 TV Out : Outputs Analogue TV or Digital TV
signals.
• Any Euro scart cable used must be signal
shielded.
• When watching digital TV in 3D imaging
mode, only 2D out signals can be output
through the SCART cable. (Only 3D models)
• If you use the Time Machine function on
digital TV, TV out signals cannot be output
through the SCART cable.
CI module connection
(Depending on model)
View the encrypted (pay) services in digital TV
mode.
• Check if the CI module is inserted into the
PCMCIA card slot in the right direction.
If the module is not inserted properly,
this can cause damage to the TV and the
PCMCIA card slot.
• If the TV does not display any video and
audio when CI+ CAM is connected, please
contact to the Terrestrial/Cable/Satellite
Service Operator.
Other connections
Connect your TV to external devices. For the
best picture and audio quality, connect the
external device and the TV with the HDMI cable.
Some separate cable is not provided.
•
Picture HDMI
ULTRA HD Deep Colour
-
On
: Support 4K @ 50/60 Hz (4:4:4, 4:2:2,
4:2:0)
-
Off
: Support 4K @ 50/60 Hz (4:2:0)
If the device connected to Input Port also
supports ULTRA HD Deep Colour, your picture
may be clearer. However, if the device doesn’t
support it, it may not work properly. In that
case, connect the device to a different HDMI
port or change the TV’s
HDMI ULTRA HD
Deep Colour setting to Off .
(This feature is available on certain models
which are supported ULTRA HD Deep Colour
only.)
Remote control
The descriptions in this manual are based on
the buttons on the remote control. Please read
this manual carefully and use the TV correctly.
To replace batteries, open the battery cover,
replace batteries (1.5 V AAA) matching
the and ends to the label inside the
compartment, and close the battery cover. To
remove the batteries, perform the installation
actions in reverse.
CAUTION
• Do not mix old and new batteries, as this
may damage the remote control.
• The remote control will not be included for
all sales market.