LG 43LT340C0CB, Руководство пользователя

Страница: 28 / 36

20
ENGLISH
Transmission / Receiving
Protocol
* (Depending on model)
Transmission
(Command1)(Command2)( )([Set ID])( )(Data)(Cr)
(Command 1) : First command to control the TV. (j, k, m or x)
(Command 2) : Second command to control the TV.
([Set ID]) : You can adjust the set ID to choose desired monitor ID number
in option menu. Adjustment range is 1 to 99. When selecting Set ID ‘0’,
every connected set is controlled. Set ID is indicated as decimal (1 to 99)
on menu and as Hexa decimal (0 x 0 to 0 x 63) on transmission/receiving
protocol.
(Data) : To transmit command data (hexadecimal). Transmit ‘FF’ data to
read status of command.
(Cr) : Carriage Return - ASCII code ‘0 x 0D’
( ) : Space – ASCII code ‘0 x 20’
OK Acknowledgement
(Command2)( )([Set ID])( )( OK )(Data)(x)
* The set transmits ACK (acknowledgement) based on this format when
receiving normal data. At this time, if the data is data read mode, it
indicates present status data. If the data is data write mode, it returns
the data of the PC computer.
Error Acknowledgement
(Command2)( )([Set ID])( )( NG )(Data)(x)
* The set transmits ACK (acknowledgement) based on this format when
receiving abnormal data from non-viable functions or communication
errors.
Data 00: Illegal Code
1 Power (Command: k a)
►
To control power on or off of the set.
Transmission
(k)(a)( )([Set ID])( )(Data)(Cr)
Data 00 : [Off]
Data 01 : [On]
Ack
(a)( )([Set ID])( )(OK/NG)(Data)(x)
►
To show TV is power on or off
Transmission
(k)(a)( )([Set ID])( )(FF)(Cr)
Ack
(a)( )([Set ID])( )(OK/NG)(Data)(x)
* Similarly, if other functions transmit ‘FF’ data based on this format,
Acknowledgement feedback presents status about each function.
* OK Ack., Error Ack. and other message may display on the screen when
TV is power on.
2 [Aspect Ratio] (Command: k c) (Main Picture Size)
►
To adjust the screen format. (Main picture format)
You can also adjust the screen format using the picture settings.
Transmission
(k)(c)( )([Set ID])( )(Data)(Cr)
Data 01 : [4:3] (Normal screen - [Just Scan] Off)
Data 02 : [16:9] (Wide screen - [Just Scan] Off)
Data 06 : [Original] ([Just Scan] Off)
Data 09 : [Just Scan]
* Please make sure that the model doesn’t support both Vertical Zoom
and All-Direction Zoom mode.
Ack
(c)( )([Set ID])( )(OK/NG)(Data)(x)
* Using the PC input, you select either [4:3] or [16:9] screen aspect ratio.
* In DTV/HDMI (1080i 50 Hz / 60 Hz, 720p 50Hz / 60 Hz, 1080p 24 Hz /
30 Hz / 50 Hz / 60 Hz), Component (720p, 1080i, 1080p) mode, [Just
Scan] is available.
* Full Wide is supported only for Digital, Analogue, AV.