6
ENGLISH
Preparing
NOTE
•
Image shown may differ from your TV.
•
Your TV’s OSD (On Screen Display) may differ
slightly from that shown in this manual.
•
The available menus and options may differ from
the input source or product model that you are
using.
•
New features may be added to this TV in the
future.
•
The items supplied with your product may vary
depending upon the model.
•
Product specifications or contents of this manual
may be changed without prior notice due to
upgrade of product functions.
•
For an optimal connection, HDMI cables and
USB devices should have bezels less than 10 mm
(0.39 inches) thick and 18 mm (0.7 inches) width.
•
Use an extension cable that supports USB 2.0 if
the USB cable or USB flash drive does not fit into
your TV’s USB port.
•
Use a certified cable with the HDMI logo
attached. If you do not use a certified HDMI
cable, the screen may not display or a
connection error may occur.
•
Recommended HDMI cable types
- High-Speed HDMI®/™ cable
- High-Speed HDMI®/™ cable with Ethernet
B
A
A
B
*A 10 mm (0.39 inches)
*B 18 mm (0.7 inches)
•
How to use the ferrite core
(Depending upon model)
- Use the ferrite core to reduce the
electromagnetic interference in the component
Y, Pb, Pr, L, R and AV Video, L, R.
(For 43/49LF5100-UA)
[Cross Section of Ferrite Core]
[to an External device]
[to the TV]
20 mm (+ / - 5 mm)
- Use the ferrite core to reduce the
electromagnetic interference in the power cord.
Wind the power cord on the ferrite core once.
(For 43/49LF5100-UF)
[Cross Section of Ferrite Core]
[to a wall plug]
[to the TV]
10 cm (+ / - 2 cm)
CAUTION
•
Do not use any unapproved items to ensure the
safety and lifespan of the product.
•
Any damages or injuries by using unapproved
items are not covered by the warranty.
•
Some models appear to have a thin film on the
screen. It is actually part of the screen; do not
remove it.
•
When attaching the stand to the TV set, place
the screen facing down on a cushioned table or
flat surface to protect the screen from scratches.
•
Make sure that the screws are fastened tightly.
(If they are not fastened securely enough, the TV
may tilt forward after being installed.)
•
Do not fasten the screws with excessive force
otherwise they may be worn out and become
loose.
Lifting and Moving the TV
When moving or lifting the TV, read the following
to prevent the TV from being scratched or
damaged and for safe transportation regardless of
its type and size.
•
It is recommended to move the TV in the box or
packing material that the TV originally came in.
•
Before moving or lifting the TV, disconnect the
power cord and all cables.
•
When holding the TV, the screen
should face away from you to
avoid damage.
