background image

- 10 -

LGE Internal Use Only

Copyright  © 

 LG Electronics. Inc. All rights reserved.

Only for training and service purposes

ADJUSTMENT INSTRUCTION

1. Application

This spec sheet is applied all of the LED TV with LT55H 

chassis.

2. Designation

(1)  The adjustment is according to the order which is 

designated and which must be followed, according to the 

plan whic al Unit: Product Specification Standard.

(2) Power adjustment : Free Voltage.

(3) Magnetic Field Condition: Nil.

(4) Input signal Unit: Product Specification Standard.

(5)  Reserve after operation: Above 5 Minutes (Heat Run).

     Temperature : at 25 ºC±5 ºC

     Relative humidity : 65 ± 10%

     Input voltage : 100~220V, 50/60Hz

(6)  Adjustment equipments : Color Analyzer (CA-210 or 

CA-110), SVC remote controller

(7) Push The “IN STOP KEY” – For memory initialization.

 

3. Main PCB check process

* APC – After Manual-Insert, executing APC

* Boot file Download 

(1)  Execute ISP program “Mstar ISP Utility” and then click 

“Config” tab.

(2)   Set as below, and then click “Auto Detect” and check “OK” 

message. 

      If “Error” is displayed, Check connection between 

computer, jig, and set.

(3)  Click “Read” tab, and then load download file (XXXX.bin) 

by clicking “Read”

(4)  Click “Connect” tab.  If “Can’t ” is displayed, Check 

connection between computer, jig, and set.

(5) Click “Auto” tab and set as below.

(6) Click “Run”.

(7) After downloading, check “OK” message. 

 

(1) 

 

filexxx.bin

 

(2) 

(3) 

Please Check the Speed  
To use speed between 
from 200KHz to 400KHz 

 

(4) 

(5)

(6)

(7)...........OK

filexxx.bin

Case1 : Software version up

1)  After downloading S/W by USB , TV set will reboot 

automatically

2) Push “In-stop” key

3) Push “Power on” key

4) Function inspection

5) After function inspection, Push “In-stop” key.

Case2 : Function check at the assembly line

1)  When TV set is entering on the assembly line, Push 

“In-stop” key at first.

2) Push “Power on” key for turning it on.

 =>  If you push “Power on” key, TV set will recover channel 

information by itself.

3).After function inspection, Push “In-stop” key.

Содержание 43LF540 -DB Series











































































Отзывы: