LG 42PX4RV series, Руководство пользователя, Страница: 36 / 52

36 Plasma TV
Set ID
Set ID
- Use this function to specify a monitor ID number.
- Refer to ‘Real Data Mapping 1’. See page 32.
1. Press the MENU button and then use D
/
E button to select the SPECIAL menu.
2. Press the G button and then use
D
/
E
button to select
Set ID
.
3. Press the G button and then use F
/
G button to adjust
Set ID
to choose the
desired monitor ID number. The adjustment range of Set ID is 1 ~ 99.
4. Press the ENTER button to save.
External Control Device Setup
SPECIAL
Prev.
Language
Key lock
ISM Method
Low power
Set ID
G
Caption / Text
Demo
SPECIAL
MENU
1
Transmission
* [Command 1]
: First command to control PDP set.
(j or k)
* [Command 2]
: Second command to control PDP set.
* [Set ID]
: You can adjust the set ID to choose
desired monitor ID number in special
menu.
Adjustment range is 1 ~ 99.
When selecting Set ID ‘0’, every
connected PDP set is controlled.
Set ID is indicated as decimal (1~99) on
menu and as Hexa decimal (0x0~0x63)
on transmission/receiving protocol.
* [DATA]
: To transmit command data.
Transmit ‘FF’ data to read status of
command.
* [Cr] :
Carriage Return
ASCII code ‘0x0D’
* [ ]
: ASCII code ‘space (0x20)’
[Command1][Command2][ ][Set ID][ ][Data][Cr]
OK Acknowledgement
* The Monitor transmits ACK (acknowledgement) based on
this format when receiving normal data. At this time, if the
data is data read mode, it indicates present status data. If
the data is data write mode, it returns the data of the PC
computer.
[Command2][ ][Set ID][ ][OK][Data][x]
Error Acknowledgement
* The Monitor transmits ACK (acknowledgement) based on
this format when receiving abnormal data from
non-viable functions or communication errors.
[Command2][ ][Set ID][ ][NG][Data][x]
Transmission / Receiving Protocol
Command Reference List
* When setting the 23 ~ 32, a menu doesn’t display on screen.
Data 1: Illegal Code
2: not support function
3: Wait more time
01. Power k a 0 ~ 1
02. Input Select k b 0 ~ 6
03. Aspect Ratio k c Refer to p. 37
04. Screen Mute k d 0 ~ 1
05. Volume Mute k e 0 ~ 1
06. Volume Control k f 0 ~ 64
07. Contrast k g 0 ~ 64
08. Brightness k h 0 ~ 64
09. Colour k i 0 ~ 64
10. Tint (option) k j 0 ~ 64
11. Sharpness k k 0 ~ 64
12. OSD Select k l 0 ~ 1
13. Remote control lock mode k m 0 ~ 1
14. PIP/DW k n Refer to p. 38
15. PIP Position k q 0 ~ 3
16. Treble k r 0 ~ 64
17. Bass k s 0 ~ 64
18. Balance k t 0 ~ 64
19. Colour Temperature (CSM) k u 0 ~ 3
20. Red Adjustment k v 0 ~ 3C
21. Green Adjustment k w 0 ~ 3C
22. Blue Adjustment k $ 0 ~ 3C
23. PIP input Source k y 0 ~ 6
24. Abnormal Status k z 0 ~ a
25. ISM Method j p 0 ~ 3
26. Low Power j q 0 ~ 1
27. Orbiter Time Setting j r 1 ~ FE
28. Orbiter Pixel Setting j s 1 ~ 3
29. Picture Size j t 0 ~ 20
30. Auto Configure j u 1
31. Tune command m a 01 ~ 7D
32. Channel Add/Del m b 00 ~ 01
33. Key m c Key Code
34. Input select (Main) x b Refer to p. 41
35. Input select (PIP) x y Refer to p. 41
COMMAND 1 COMMAND 2 DATA
(Hexadecimal)
• Baud rate : 9600 bps (UART)
• Data length : 8 bits
• Parity : None
* Use a crossed (reverse) cable. • Stop bit : 1 bit
• Communication code : ASCII code
Communication Parameters