LG 42PQ30R, Руководство пользователя

Страница: 9 / 29

2) Click the connect button and confirm “ Dialog Box ” .
3) Click the Config button and Change speed
E2PROM Device setting : over the 350Khz
4) Read and write bin file
Click “ (1)Read ” tab, and then load download file(XXXX.bin)
by clicking “ Read ” .
5) Click “ Auto(2) ” tab and set as below
6) Click “ Run(3) ” .
7) After downloading, check “ OK(4) ” message.
3-6. Download Method (By using USB
Memory Stick)
[Caution]
- Using ‘ power on ’ button of the control R/C, power on TV.
- USB file (EPK) version must be bigger than downloaded
version of main B/D.
(1) Using ‘ Power ON ’ button of the control R/C, Power on TV.
(2) Insert the USB memory stick to the SET.
(3) Display USB loding message then, push the
‘ Exit ’ Key of
control R/C
(4) Push the ‘ MENU ’ Key and move the cusor ‘ OPTION ’ of
OSD ( Fig. 1)
* Caution: Don
’ t push the ‘ OK ’ key.Just cusor is on the
‘ OPTION ’ menu.
(5) Push the “ 7 ” key of control R/C continuously.
Then, Display “ TV Software Update ” Pop-up menu. (Fig. 2)
- 9 - LGE Internal Use Only Copyright©2009 LG Electronics. Inc. All right reserved.
Only for training and service purposes
( Fig. 1)
( Fig. 2)