206-4071
P A G E 6
Commercial Mode Setup for Master TV
This page provides an overview of the TV configuration. See the pages listed below for more
specific, detailed instructions at each step; how to access and use the Installer menu etc.
Note 1:
Disconnect all Aux inputs. Under certain conditions, EZ Scan (Channel
search) is disabled if there is an Aux input active.
Overview: Commercial Mode Setup Procedure
1. Set Installer Menu Items
(Enter Installer Menu, see page 10 for detailed instructions.)
a. Set Installer menu item
117 FACT DEFAULT
, to
001
and press
ENTER
.
(This clears all installer menu items, custom settings, channel
labels/icons and reloads the factory default settings.)
b. Set Item
003 BAND/AFC.
-
Broadcast
: set to
000
.
-
HRC
: set to
002
-
CATV
: set to
001.
-
IRC
: set to
003
c. Set item
028 CH OVERIDE
to
001
. This allows access to EZ Scan, Manual
Scan and Channel Edit options in the Setup Menu.
d. Set other particular installer items that affect your TV programming net-
work. See pages 10 - 15.
e. After all required installer menu item settings have been adjusted, press
ENTER on the remote to remove Installer Menu.
2. Set Up TV Features (See TV Owners Manual)
(Audio, Lock, Time menus etc. See TV Clonable options list on page 16.)
3. Run EZ Scan
(Search for all available channels.) Go to the Setup menu and access the
EZ Scan option, follow onscreen instructions.
a. Edit Channel Scan. In the Setup Menu, access the Channel Edit menu.
• Add/Delete channels manual scan menu per your system requirements.
Note: Physical channel numbers are used to indicate Virtual channels.
• Add familiar Channel Icons like ABC, CBS, NBC etc. to the channel
onscreen display. Add identifiable labels for the end user to readily know
what common networks are available. In the Setup menu, select the
Channel Label option, follow instructions on the bottom of the screen.
4. Transfer TV Setup to Controller Box: 2-5-5 + Menu
After the TV channel scan has been edited and channel label icons added,
enter the Installer menu. Once in the Installer menu, press 2-5-5 and MENU
on the remote. This transfers the TV setup to the internal controller box.
5. Perform Adding Custom Channel Labels: 2-5-4 + Menu Mode
Enter Installer menu, press 2-5-4 and Menu. Add your own custom labels to
channel onscreen displays. (See page 17.) To remove menu press
MENU
.
Verify TV Setup
At this point, verify that the channel lineup, channel icons and custom
labels are correct. Make sure the TV features are set per your requirements.
Set item
028 Ch Overide
to
000
to lock the channel scan. After the pre-
ceding has been completed, the Master TV setup is ready to be copied to
the LT2002 Clone Programmer, see next page.
003 BAND/AFC
00X
028 CH.
OVERIDE
001
117 FACT
DEFAULT
00X
TV Installer Menu
Set these Installer Menu Items
DIGITAL 19-3
WXYZ
MONO STEREO SAP
Custom Channel Label ‘WXYZ’ created in
2-5-4 + Menu Add Channel Label Mode
028 CH.
OVERIDE
000
After TV setup has been verified,
set item 028 Ch Overide back to 000.
000 INSTALLER
SEQ
000
UPN 000-000-000-000
FPGA E0F1
PTC V1.00.000
CPU V3.06.00
PTC INSTALLER MENU
