LG 42LX330C.AMF, Руководство по установке

Страница: 28 / 54

ENG
ENGLISH
28
CONFIGURATION SETUP
CONFIGURATION SETUP
y y
Image shown may differ from your TV.
Installation Menu (V 3.0)
LG Hotel Mode Setup
TV Manager
Password Change
Set ID Setup
Configuration Setup
Multi Timer
Lock Mode
External Speaker
HCEC Setup
No Signal Image
Welcome Video
Configuration Setup
OK
S/W : 00.02.00.01 Micom : 0.00.32
Number of RCU
Splash Offset Time
USB Auto Playback
15Min Auto Off
Auto Sensing
Forced DVI Audio
Screen Saver Cube
One Channel Map
Configuration Setup
Photo
Previous OK
Disable
To Set
Yes
No
0
◄
Off
►
Off
Off
1 Number of RCU
y
It is a function to set whether to use Select RCU or not and set number of RCU.
y
When Number of RCU is set to ‘0’, this function do not use.
y
Number of RCU value range 1~9
y
* RCU(Remote Control Unit) : It is special RCU that operates only setted number of RCU in TV.
2
Splash Offset Time
y
Set the splash image display time
y
When Splash Offset Time is set to ‘OFF’, TV logo(splash image) do not display.
y
The time can be set to between 0 and 10 seconds.
3
USB Auto Playback
y
When ‘USB Auto Playback’ is set to ‘Movie’, TV finds and plays the USB’s movie files located at the
root(top) directory Movies if USB is plugged in. (Some menu OSDs may prevent this function.)
y
When ‘USB Auto Playback’ is set to ‘Photo’, TV finds and plays the USB’s photo files located at the
root(top) directory Photos if USB is plugged in. (Some menu OSDs may prevent this function.)
y
If it reaches the last file, it starts the first file again.
4 15Min Auto Off
y
When ‘15Min Auto Off’ is set to ‘Enable’, TV will turn off if there is no signal in 15Min.
5
Auto Sensing
y
If 'Auto Sensing' is set to 'To Set ', the input is automatically switched when the input signal that you
set to 'ON' is received.
y
If 'Auto Sensing' is set to 'Disable', the input is not switched when the input signal is received.
y
If SIMPLINK is set to On, HDMI is automatically set to Disable and can not work.
y
If the signal is removed while Auto Sensing (automatic input switch) is enabled, the input returns to the
previous setting.
y
If the several inputs are connected by enabling Auto Sensing and the automatic input switch is
performed several times, the input returns to the previous setting only for the last input and does not
repeat the operation for the rest.
y
For the AV input connected using the euro scart cable, Auto Sensing does not work for the TV input
because the Auto AV function is enabled.(For other inputs, Auto Sensing works normally.)