4
ENG
ENGLISH
INSTALLATION MENU
NOTE
y
y
Some features described in the Installation manual may not be supported in certain models.
Signage Setup
Use this menu to configure the digital signage after installation.
Power On Status
y
y
You can select the operating status of the monitor when the main power is switched on.
y
y
You can select from among PWR, STD, and LST.
y
y
PWR sets the status of the monitor to On whenever the main power is switched on.
y
y
STD sets the status of the monitor to Standby when the main power is switched on.
y
y
LST sets the status of the monitor back to its previous status.
IR Operation
y
y
If you set IR Operation to Normal, you can use the remote control.
y
y
If you set IR Operation to Power Key Only, you can only use the Power Key.
y
y
If you set IR Operation to Block All, you cannot use the remote control.
Local Key Operation
y
y
If you set Local Key Operation to Normal, you can use the Local Key.
y
y
If you set Local Key Operation to Power Key Only, you can only use the Power Key.
y
y
If you set Local Key Operation to Block All, you cannot use the Local Key.
Wake On LAN
y
y
You can set whether to use the Wake On LAN feature.
y
y
You can set this option to On or Off.
y
y
If you set this option to On, the Wake On LAN feature is enabled and you can turn on the product remotely via
LAN.
y
y
If you set this option to Off, the Wake On LAN feature is disabled.
No Signal Power Off (15 Min)
y
y
You can choose whether to use the 15 Min Force Off feature.
y
y
You can set this option to On or Off.
y
y
If you set this option to On, the product turns off when it has remained in No Signal status
for 15 minutes.
y
y
If you set this option to Off, the 15 Min Force Off feature is disabled.
y
y
Set this option to Off when you use the product for a long period of time.
