ENGLISH
11
CAUTION
NOTE
•
Use the screws that are listed in the VESA
standard screw specifications.
•
The wall mount kit includes an installation
manual and necessary parts.
•
The wall mount bracket is optional. You can
obtain additional accessories from your local
dealer.
•
The length of screws may differ depending upon
the wall mount. Make sure to use the proper
length.
•
•
For more information, refer to the manual
supplied with the wall mount.
Connections (Notifications)
You can connect various external devices to the TV.
Supported external devices are: HD receivers, DVD
players, VCRs, USB storage devices, PC, and other
external devices. For more information on external
device’s connection, refer to the manual provided
with each device.
NOTE
•
If you record a TV program on a DVD recorder or
VCR, make sure to connect the TV signal input
cable to the TV through a DVD recorder or VCR.
For more information about recording, refer to
the manual provided with the connected device.
•
The external device connections shown may
differ slightly from illustrations in this manual.
•
Connect external devices to the TV regardless
about the order of the TV port.
•
Refer to the external equipment’s manual for
operating instructions.
Connecting to an Antenna or
Cable
Connect an antenna, cable, or cable box to watch
TV while referring to the following. The illustrations
may differ from the actual items and an RF cable is
optional.
CAUTION
•
Make sure not to bend the copper wire of the RF
cable.
Copper wire
•
Complete all connections between devices, and
then connect the power cord to the power outlet
to prevent damage to your TV.
NOTE
•
Use a signal splitter to use 2 TVs or more.
•
DTV Audio Supported Codec: MPEG,
Dolby Digital.
Other Connections
Connect your TV to external devices. For the best
picture and audio quality, connect the external
device and the TV with the HDMI cable. Depending
upon the model, a cable may not be provided.
Remote Control
The descriptions in this manual are based on
the buttons on the remote control. Please read
this manual carefully and use the TV correctly. To
install batteries, open the battery cover, replace
batteries (1.5 V AAA) matching the and ends
to the label inside the compartment, and close
the battery cover. Failure to match the correct
polarities of the battery may cause the battery
to burst or leak, resulting in fire, personal injury,
or ambient pollution. To remove the batteries,
perform the installation actions in reverse.
This remote uses infrared light. When in use, it
should be pointed in the direction of the TV’s
remote sensor.
(Image shown may differ from your TV.)
Do not install this product on a wall if it
could be exposed to oil or oil mist. This may
damage the product and cause it to fall.
