COMMER
CIAL
MODE
SETUP
95
INSTALLER MENU
Use the Installer’s Menu to set up or change operational settings.
See more detailed descriptions of the Installer menu items on the following pages...
Using the Installer’s Menu
Items 000
~
119 are immediately accessible only upon entering the
Installer’s Menu. Their numbers, descriptions, ranges, factory default
settings, and a place for listing any changes made on-site are given
below and on the following pages.
Typical Installer Menu
Menu Item Function
Value Range Default Value
Brief Description of Function and Comments
000
INSTALLER SEQ
0
~
3
0
Leave default set to 0.
001
POWER MANAGE
0
~
7
0
Sets number of hours of no activity before auto shut Off.
002
AC ON
0 / 1
0
Set to 1 to enable auto turn On at power up.
003
BAND/AFC
0
~
3
1
Selects Tuning Band: 0=Broadcast, 1=CAT V, 2=HRC, 3=IRC
004
STRT CHANNEL
0
~
127, 255
255
Channel at turn-on (Set to 255 to tune in last channel before power Off).
005
CHAN LOCK
0 / 1
0
If set to 1, cannot tune from current channel.
007
STRT VOLUME
0
~
63, 255
255
Sets Volume level at TV turn-on (Set 255 to retain last volume level).
008
MIN VOLUME
0
~
63
0
Sets minimum allowable volume setting.
009
MAX VOLUME
0
~
63
63
Sets maximum allowable volume setting.
010
MUTE DISABLE
0 / 1
0
Set to 1 to disable mute function.
011
KEY DEFEAT0 / 1
0
Set to 1 to disable menu navigation keys on display panel.
015
SLEEP TIMER
0 / 1
1
Set to 1 to enable Sleep Timer.
016
EN TIMER
0 / 1
0
Set to 1 to enable On/Off Timers.
017
ALARM
0 / 1
1
Set to 1 to enable Alarm.
021
V-CHIP
0 / 1
1
Set to 1 to enable V-Chip functions.
022
MAX BLK HRS
0
~
99
12
Sets number of V-Chip (Parental Control) blocking hours.
023
CAPTION LOCK
0 / 1
0
Set to 1 to retain caption setting at power Off.
028
CH. OVERIDE
0 / 1
1
If set to 0, limits direct access to favorite channels.
029
OLD OCV
0 / 1
0
Set to 1 to change M.P.I. operation to OCV.
030
ACK MASK
0 / 1
0
If set to 1, changes M.P.I. for some OCV boxes.
031
POLL RATE
20
~
169
94
Selects poll rate for M.P.I.
032
TIMING PULSE
186
~
227
207
Sets baud rate for M.P.I.
034
CAMPORT EN
0 / 1
1
Set to 1 to enable Video 2 input.
000 INSTALLER
SEQ
000
UPN 000-000-000-000
FPGA E0F1
PTC V1.00.000
CPU V3.06.00
GEM PTC INSTALLER MENU
Activating changes made to the Installer’s Menu
After exiting the Installer menu, power the TV off and then back on to activate changes to the Installer menu.
Installer Menu Items 000 through 034
Accessing the Installer’s Menu
Make sure TV is on. Installer’s menu items can be accessed by using
an installer’s remote control. Just press MENU repeatedly until the
TV seems to stop responding, then press 9, 8, 7, 6, then ENTER to
access the Installer’s menu. To remove the Installer’s menu, press
ENTER again.
Any changes you make will be stored in nonvolatile
memory. (The menu also disappears automatically.)
The Installer’s menu opens with item 000 INSTALLER SEQ 000.
Use the Up/Down arrow keys to sequence through the available
menu items. Or, access an item directly by keying in the line number,
then pressing MENU. For example, to access the Sleep Timer option
which is item 015, press 0-1-5, then MENU. To change a setting,
use the Left/Right arrow keys. Or, enter a value directly.
Содержание 37LG700H
Страница 2: ......
Страница 108: ...COMMERCIAL MODE SETUP 106 TV AUX INPUT CONFIGURATION COMMERCIAL MODE SETUP ...
Страница 136: ......
