Owner’s Manual
Installation
Owner’s Manual
1.5V
1.5V
Batteries
Power Cord
MODE
DAY
-
DAY +
FLASHBK
TIMER
TV INPUT
TV/VIDEO
EXIT
GUIDE
CC
75
Ω
Round Cable
Ensure that the following accessories are included with your plasma display. If an accessory is missing, please contact the dealer
where you purchased the product.
2-Wall brackets
2-bolts
Remote Control
Please set it up carefully so the monitor doesn’t fall over.
Set it up close to the wall so the monitor doesn’t fall over when it is pushed backwards.
The instructions shown below is a safer way to set up the monitor, which is to fix it on the wall so the monitor doesn’t fall over
when it is pulled in the forward direction.
It will prevent the monitor from falling forward and hurting people. It will also prevent the monitor from damage caused by fall.
Please make sure that children don’t climb on or hang from the monitor.
1. Use the bracket and the bolt to fix the monitor to the wall as shown in the picture.
2. Secure the bracket with the bolt (not provided as parts of the monitor, must purchase separately) on the wall.
3. Use a sturdy rope (not provided as parts of the monitor, must purchase separately) to tie themonitor. It is safer to tie the rope so
it becomes horizontal between the wall and the monitor.
Notes:
When moving the monitor to another place undo the ropes first.
Use a TV holder or a cabinet that is big and strong enough for the size and weight of the monitor.
To use the product safely make sure that the height of the bracket that is mounted on the wall is same as that of the product.
Installation
Installation
Installation Instructions
Installation Instructions
Accessories
Accessories
D-sub 15 pin Cable
Twister Holder
Arrange the wires
with the twister holder.
1
2
3
