manualshive.com logo in svg

LG 32SE3KE, Руководство пользователя, Страница: 65 / 111

Поделиться
Скачать
LG 32SE3KE Скачать руководство пользователя страница 65

ENGLISH

15

Expert Controls

   

General

   

Expert Controls

PC/OPS Control

 •

PC/OPS Power Control

: Enable you to control the power of the OPS as you turn on/off the display.

 -

Disable

: Disable OPS Power Control.

 -

Sync (On)

: Synchronize the monitor's power status only when the monitor is on.

 -

Sync (On/Off)

: Synchronize the monitor's power status with the OPS.

 •

Control Interface Selection

: This feature enables you to configure communication with the OPS connected to your 

monitor.

 -

Display

: Enable communication with external serial ports.

 -

OPS

: Enable communication with the OPS connected to your monitor.

 •

This feature may not be available for all models.

Background Image

This feature enables you to set the default background image.

 •

Booting Logo Image

:  Change the logo image that appears when the device boots up. If you set this feature to 

Off

, 

the Booting Logo does not appear.

 -

Image Download

: Download Booting Logo Image files onto your monitor. In order to download a Booting Logo 

Image, there must be a Booting Logo Image file in a “LG_MONITOR” on your USB storage device.

 NOTE

 •

The feature to update the Booting Logo Image only supports JPEG files of 1 MB or smaller can be used as Booting 

Logo Images.

 •

Progressively encoded JPEG files are not applicable.

 •

Make sure that Booting Logo Images have a resolution suitable for the screen resolution of the monitor.

 •

The maximum resolution for a Booting Logo Image is Full HD (1920 x 1080) and HD (1360 x 768). The minimum 

resolution for a Booting Logo Image is 64 x 64.

 •

No Signal Image

:  Change the image that appears when there is no signal. If you set this option to 

Off

, no image 

appears when there is no signal.

 -

Image Download

: Download No Signal Image files onto your monitor. In order to download an image, there must 

be an No Signal Image file in a “lg_sig” or “LG_SIG” folder on your USB storage device. The maximum total size of 

images to be downloaded: The total size should not exceed 10240KB (10MB).

 NOTE

 •

The feature to update No Signal Images only supports JPEG files of 1 MB or smaller.

 •

Progressively encoded JPEG files are not applicable.

 •

The maximum resolution for a No Signal Image is Full HD (1920 x 1080) and HD (1360 x 768). The minimum 

resolution for a Booting Logo Image is 64 x 64.

 •

No Signal Image files with a resolution of Full HD (1920 x 1080) can cause image sticking.

 •

Only No Signal Image files with English names are displayed correctly.

Содержание 32SE3KE
















































































































Отзывы:

Нет отзывов