LG 32LV2510, Руководство по обслуживанию

Страница: 13 / 62

* Detail EDID Options are below
ⓐ Product ID
ⓑ Serial No: Controlled on production line.
ⓒ Month, Year: Controlled on production line:
ex) Week : ‘01’ -> ‘01’
Year : ‘2011’ -> ‘15’ fix
ⓓ
Model Name(Hex):
ⓔ
Checksum: Changeable by total EDID data.
ⓕ Vendor Specific(HDMI)
5. Model name & Serial number D/L
• Press “Power on” key of service remocon.
(Baud rate : 115200 bps)
• Connect RS232 Signal Cable to RS-232 Jack.
• Write Serial number by use RS-232.
• Must check the serial number at the Product/Service
info.(menu key -> red key -> select product/Service info)
5.1. Signal TABLE
CMD : A0h
LENGTH : 85~94h (1~16 bytes)
ADH : EEPROM Sub Address high (00~1F)
ADL : EEPROM Sub Address low (00~FF)
Data : Write data
CS : CMD + ADH + ADL + …+ Data_n
Delay : 20ms
5.2. Command Set
* Description
FOS Default write : <7mode data> write
Vtotal, V_Frequency, Sync_Polarity, Htotal, Hstart, Vstart, 0,
Phase
Data write : Model Name and Serial Number write in
EEPROM,.
5.3. Method & notice
A. Serial number D/L is using of scan equipment.
B. Setting of scan equipment operated by Manufacturing
Technology Group.
C. Serial number D/L must be conformed when it is produced
in production line, because serial number D/L is mandatory
by D-book 4.0.
* Manual Download (Model Name and Serial Number)
If the TV set is downloaded by OTA or Service man, Sometimes
model name or serial number is initialized.(Not always)
There is impossible to download by bar code scan, so It need
Manual download.
1) Press the ‘instart’ key of ADJ remote control.
2) Go to the menu ‘6.Model Number D/L’ like below photo.
3) Input the Factory model name(ex 32LV2510-TB) or Serial
number like photo.
4) Check the model name Instart menu -> Factory name
displayed (ex 32LV2510-TB)
5) Check the Product/Service info.(Menu key -> Red key ->
Select product/Service info)
-> Buyer model displayed (ex 32LV2510-TB)
Model Name HEX EDID Table DDC Function
HD/FHD Model 0001 01 00 Analog/Digital
LGE Internal Use Only Copyright © 2011 LG Electronics. Inc. All rights reserved.
Only for training and service purposes
- 13 -
MODEL MODEL NAME(HEX)
all 00 00 00 FC 00 4C 47 20 54 56 0A 20 20 20 20 20 20 20
INPUT MODEL NAME(HEX)
HDMI1 65030C001000
HDMI2 65030C002000
HDMI3 65030C003000
CMD LENGTH ADH ADL DATA_1 . . . Data_n CS DELAY
No. Adjust mode CMD(hex) LENGTH(hex) Description
1
EEPROM WRITE A0h 84h+n
n-bytes Write (n = 1~16)