background image

13

ENGLISH

_Inde

x

 

Do not mix new batteries with old batteries. This may cause 
the batteries to overheat and leak.

 

Failure to match the correct polarities of the battery may 
cause the battery to burst or leak, resulting in fire, personal 
injury, or ambient pollution.

 

This apparatus uses batteries. In your community there 
might be regulations that require you to dispose of these 
batteries properly due to environmental considerations. 
Please contact your local authorities for disposal or recycling 
information.

 

The product's internal and external batteries should not be 
exposed to excessive heat such as direct sunlight, fire, or 
the like.

Troubleshooting

The software version can be updated for improvement in performance.
Customer needs to ensure the compatibility of customer’s equipment 
with LGE software. If needed, please consult with LGE and upload 
revised software version according to the guidance provided by LGE.
Cannot control the TV with the remote control.

 

Check the remote control sensor on the product and try again.

 

Check if there is any obstacle between the product and the remote 
control.

 

Check if the batteries are still working and properly installed (  to 

,   to  ).

No image display and no sound is produced.

 

Check if the product is turned on.

 

Check if the power cord is connected to a wall outlet.

 

Check if there is a problem in the wall outlet by connecting other 
products.

The TV turns off suddenly.

 

Check the power control settings. The power supply may be 
interrupted.

 

Check if the auto-off function is activated on the settings related 
time.

 

If there is no signal while the TV is on, the TV will turn off 
automatically after 15 minutes of inactivity.

When connecting to the PC (HDMI), no signal is detected.

 

Turn the TV off/on using the remote control.

 

Reconnect the HDMI cable.

 

Restart the PC with the TV on.

Abnormal display

 

If the product feels cold to the touch, there may be a small “flicker” 
when it is turned on. This is normal, there is nothing wrong with 
product.

 

This panel is an advanced product that contains millions of pixels. 
You may see tiny black dots and/or brightly coloured dots (red, blue 
or green) at a size of 1 ppm on the panel. This does not indicate a 
malfunction and does not affect the performance and reliability of 
the product. This phenomenon also occurs in third-party products 
and is not subject to exchange or refund.

 

You may find different brightness and colour of the panel depending 
on your viewing position(left/right/top/down). 
This phenomenon occurs due to the characteristic of the panel. It is 
not related with the product performance, and it is not malfunction.

 

Displaying a still image for a prolonged period of time may cause 
image sticking. Avoid displaying a fixed image on the TV screen for a 
long period of time.

Generated sound

 

“Cracking” noise: A cracking noise that occurs when watching or 
turning off the TV is generated by plastic thermal contraction due to 
temperature and humidity. This noise is common for products where 
thermal deformation is required.

 

Electrical circuit humming/panel buzzing: A low level noise is 
generated from a high-speed switching circuit, which supplies a large 
amount of current to operate a product. It varies depending on the 
product. This generated sound does not affect the performance and 
reliability of the product.

 

When cleaning the product, be careful not to allow any 
liquid or foreign objects to enter the gap between the 
upper, left or right side of the panel and the guide panel. 
(Depending on model)

 

Make sure to wring any excess water or cleaner from the 
cloth.

 

Do not spray water or cleaner directly onto the TV screen.

 

Make sure to spray just enough of water or cleaner onto a 
dry cloth to wipe the screen.

Содержание 32LS66 Series































Отзывы: