background image

ENGLISH

4

 

When connecting external devices such as video game consoles, 
make sure the connecting cables are long enough. Otherwise, 
the product may fall over, which may cause injury or damage the 
product.

 

Do not turn the product On/Off by plugging-in or unplugging 
the power plug to the wall outlet. (Do not use the power plug for 
switch.) It may cause mechanical failure or could give an electric 
shock.

 

Please follow the installation instructions below to prevent the 
product from overheating.

 

-

The distance between the product and the wall should be more 
than 10 cm.

 

-

Do not install the product in a place with no ventilation (e.g., on 
a bookshelf or in a cupboard).

 

-

Do not install the product on a carpet or cushion.

 

-

Make sure the air vent is not blocked by a tablecloth or curtain.

This may result in fire.

 

Take care not to touch the ventilation openings when watching the 
TV for long periods as the ventilation openings may become hot. 
This does not affect the operation or performance of the product.

 

Periodically examine the cord of your appliance, and if its 
appearance indicates damage or deterioration, unplug it, 
discontinue use of the appliance, and have the cord replaced with 
an exact replacement part by an authorized servicer.

 

Prevent dust collecting on the power plug pins or outlet. This may 
cause a fire hazard.

 

Protect the power cord from physical or mechanical abuse, such as 
being twisted, kinked, pinched, closed in a door, or walked upon. 
Pay particular attention to plugs, wall outlets, and the point where 
the cord exits the appliance.

 

Do not press strongly upon the panel with a hand or sharp object 
such as nail, pencil or pen, or make a scratch on it, as it may 
cause damage to screen.

 

Avoid touching the screen or holding your finger(s) against it for 
long periods of time. Doing so may produce some temporary or 
permanent distortion/damage to screen.

 

As long as this unit is connected to the AC wall outlet, it is not 
disconnected from the AC power source even if you turn off this 
unit by SWITCH.

 

When unplugging the cable, grab the plug and unplug it, by 
pulling at the plug. Don’t pull at the cord to unplug the power cord 
from the power board, as this could be hazardous.

 

When moving the product, make sure you turn the power off first. 
Then, unplug the power cables, antenna cables and all connecting 
cables.
The TV set or power cord may be damaged, which may create a fire 
hazard or cause electric shock.

 

When moving or unpacking the product, work in pairs because the 
product is heavy. Otherwise, this may result in injury.

 

Refer all servicing to qualified service personnel. Servicing is 
required when the apparatus has been damaged in any way, such 
as power supply cord or plug is damaged, liquid has been spilled 
or objects have fallen into the apparatus, the apparatus has been 
exposed to rain or moisture, does not operate normally, or has 
been dropped.

 

Do not use high voltage electrical goods near the TV (e.g. electric 
mosquito-swatter). This may result in product malfunction.

 

When cleaning the product and its components, unplug the power 
first and wipe it with a soft cloth. Applying excessive force may 
cause scratches or discolouration. Do not spray with water or wipe 
with a wet cloth. Do not clean your TV with chemicals including 
glass cleaner, any type of air freshener, insecticide, lubricants, wax 
(car, industrial), abrasive, thinner, benzene, alcohol etc., which can 
damage the product and/or its panel. Otherwise, this may result 
in fire, electric shock or product damage (Deformation, corrosion 
or breakage).

Preparing

 

If the TV is turned on for the first time after it was shipped from 
the factory, initialization of the TV may take a few minutes. 
(Depending on model)

 

Image shown may differ from your TV.

 

Your TV’s OSD (On Screen Display) may differ slightly from that 
shown in this manual.

 

The available menus and options may differ from the input source 
or product model that you are using.

 

New features may be added to this TV in the future.

 

The items supplied with your product may vary depending on the 
model.

 

Product specifications or contents of this manual may be changed 
without prior notice due to upgrade of product functions.

 

For an optimal connection, HDMI cables and USB devices should 
have bezels less than 10 mm thick and 18 mm width. Use an 
extension cable that supports USB 2.0 if the USB cable or USB 
memory stick does not fit into your TV’s USB port.

A

B

A

B

*  A 

<

=

 10 mm

*  B 

<

=

 18 mm

 

Use a certified cable with the HDMI logo attached.

 

If you do not use a certified HDMI cable, the screen may not display 
or a connection error may occur. (Recommended HDMI Cable Types)

 

-

High-Speed HDMI

®/

TM

 Cable (3 m or less)

 

-

High-Speed HDMI

®/

TM

 Cable with Ethernet (3 m or less)

Содержание 32LJ550D






































Отзывы: