LG 32LB550B, Руководство по обслуживанию, Страница: 10 / 73

ADJUSTMENT INSTRUCTION ADJUSTMENT INSTRUCTION
1. Application 1. Application
This spec sheet is applied all of the LED TV with LJ43B, This spec sheet is applied all of the LED TV with LJ43B,
chassis. chassis.
2. Designation 2. Designation
(1 (1 ) ) The adjustment The adjustment is according is according to the to the order which order which is is
designated and which must be followed, according to the designated and which must be followed, according to the
plan whic al Unit: Product Specification Standard. plan whic al Unit: Product Specification Standard.
(2) Power adjustment : Free Voltage. (2) Power adjustment : Free Voltage.
(3) Magnetic Field Condition: Nil. (3) Magnetic Field Condition: Nil.
(4) Input signal Unit: Product Specification Standard. (4) Input signal Unit: Product Specification Standard.
(5) Reserve after operation: Above 5 Minutes (Heat Run). (5) Reserve after operation: Above 5 Minutes (Heat Run).
T T emperature emperature : : at at 25 25 ºC ºC ±5 ±5 ºC ºC
Relative Relative humidity humidity : : 65 65 ± ± 10% 10%
Input Input voltage voltage : : 100~220V, 100~220V, 50/60Hz 50/60Hz
(6) (6) Adjustment Adjustment equipments equipments : Color Anal : Color Anal yzer ( yzer ( CA-210 or CA-210 or
CA-110), SVC remote controller CA-110), SVC remote controller
(7) Push The “IN STOP KEY” – For memory initialization. (7) Push The “IN STOP KEY” – For memory initialization.
3. Main PCB check process 3. Main PCB check process
* APC – After Manual-Insert, executing APC * APC – After Manual-Insert, executing APC
* Boot file Download * Boot file Download
(1) Execute ISP program “Mstar ISP Utility” and then click (1) Execute ISP program “Mstar ISP Utility” and then click
“Config” tab. “Config” tab.
(2) Set as below, and then click “Auto Detect” and check “OK” (2) Set as below, and then click “Auto Detect” and check “OK”
message. message.
If “Error” is displayed, Check connection between If “Error” is displayed, Check connection between
computer, jig, and set. computer, jig, and set.
(3) Click “Read” tab, and then load download file (XXXX.bin) (3) Click “Read” tab, and then load download file (XXXX.bin)
by clicking “Read” by clicking “Read”
(4) (4) Click “Connect” tab. Click “Connect” tab. If “Can’t ” is displayed, Check If “Can’t ” is displayed, Check
connection between computer, jig, and set. connection between computer, jig, and set.
(1) (1)
filexxx.bin filexxx.bin
(2) (2) (3) (3)
Case1 : Software version up Case1 : Software version up
1) 1) After downl After downl oading S/W b oading S/W b y USB , TV set y USB , TV set will r will r eboot eboot
automatically automatically
2) Push “In-stop” key 2) Push “In-stop” key
3) Push “Power on” key 3) Push “Power on” key
4) Function inspection 4) Function inspection
5) After function inspection, Push “In-stop” key. 5) After function inspection, Push “In-stop” key.
Case2 : Function check at the assembly line Case2 : Function check at the assembly line
1) When TV set is entering on the assembly line, Push 1) When TV set is entering on the assembly line, Push
“In-stop” key at first. “In-stop” key at first.
2) Push “Power on” key for turning it on. 2) Push “Power on” key for turning it on.
=> If you push “Power on” key, TV set will recover channel => If you push “Power on” key, TV set will recover channel
information by itself. information by itself.