GP2
eng
❓
Motor Setting Option
•
DiSEqC 1.2
: Control motor to change satellite dish position.
Drive Direction
: Select the direction in which you want to move the motor.
Drive Mode
: Two modes are available: Step and Continuous.
-
Step
: The motor moves based on the value you enter (from 1 to 128).
-
Continuous
: The motor moves continuously until you press the Stop.
Test TP
: Select the test TP you want to tune.
Set Limit
: Set the motor movement to east or west to have the motor move
only within the direction set.
-
On
: You can limit the movement to the current direction by selecting the
West/East.
-
Off
: You can cancel the limit you set.
