9
ENG
ENGLISH
ASSEMBLING AND PREPARING
y
y
Once the pin is removed, it is not necessary
to re-insert it to adjust the height.
Adjusting the stand height
y
y
Do not put your fingers or
hand between the screen
and the base (chassis) when
adjusting the screen's height.
CAUTION
WARNING
1
2
0.0 mm
1
Place the monitor mounted on the stand base
in an upright position.
2
Remove the
tape
attached at the bottom rear
of the
stand body,
then pull out the
locking
pin
.
3
The height can be adjusted up to
120 mm
.
tape
Locking Pin
stand Body
