LG 26LK310, Руководство по обслуживанию

Страница: 12 / 28

4.4.2.1. Method of Using Internal pattern
(1) Apply model : 22/26/32LK310/311
(2) Process
1) Change the Input to RGB mode..
2) Press ADJ key on remote control for adjustment.
3) Enter Password number. Password is “0 0 0 0”.
4) Select “0. ADC calibration : RGB” by using
D / E (CH +/-)
and press ENTER(
A
).
5) ADC adjustment is executed automatically .
6) When ADC adjustment is finished, this OSD appear.
* Caution : No need to connect external input cable.
* Caution : Adjustment result is applied after SET Off/On.
4.5. Check SW Version
(1) Method
1) Push In-star key on Adjust remote-control.
2) SW Version check
Check “SW VER : V3.xx”
5. PCB assembly adjustment method
5.1. Input Area-Option
(1) Profile : Must be changed the Area option value because
being different of each Country’s Language and
signal Condition.
(2) Equipment : Adjustment remote control.
(3) Adjustment method
- The input methods are same as other chassis.(Use IN-
START Key on the Adjust Remote control.)
Refer to Job Expression of each main chassis assembly
(EBTxxxxxxxx) for Option value.
5.2. Adjustment of White Balance
(For Automatic Adjustment)
- Purpose : Adjust the color temperature to reduce the
deviation of the module color temperature.
- Principle : To adjust the white balance without the saturation,
Fix the one of R/G/B gain to 192 (default data)
and decrease the others.
- Adjustment mode : Three modes - Cool / Medium / Warm
- Required Equipment
1) Remote control for adjustment
2) Color Analyzer : CA100+ or CA-210 or same product -
LCD TV(ch : 9)
(should be used in the calibrated ch by CS-1000)
3) Auto W/B adjustment instrument(only for Auto adjustment)
5.2.1 Adjustment of White Balance (For automatic adjustment)
* LP91J Support RS-232C & I2C Interface For ADC/DDC
Adjustment.
(1) Enter the adjustment mode of DDC
- Set command delay time : 50ms
- Enter the DDC adjustment mode at the same time heat-
run mode when pushing the power on by power only key
- Maintain the DDC adjustment mode with same condition
of Heat-run => Maintain after AC off/on in status of Heat-
run pattern display)
(2) Release the DDC adjustment mode
- Release the adjust mode after AC off/on or std-by off/on
in status of finishing the Hear-run mode
- Release the Adjust mode when receiving the aging off
command(WB 00 FF) from adjustment equipment.
- Need to transmit the aging off command to TV set after
finishing the adjustment.
- Check DDC adjust mode release by exit key and release
DDC adjust mode)
(3) Enter the adjust mode of white balance)
- Enter the white balance adjustment mode with aging
command (F3, 00, 00)
(4) Release the adjust mode of white balance
- Enter the white balance adjustment mode with aging
command(F3, 00, FF)
* Luminance min value is 150cd in the Cool/Medium/Warm
mode(For LCD)
- 12 - LGE Internal Use Only Copyright © 2011 LG Electronics. Inc. All right reserved.
Only for training and service purposes
OK
MODEL : 32LK310
SW VER : V3.04
Mod e : Hom e Use UTT 6
ADC CAL. RGB : NG
RGB: OK HDMI1 : NG
Comp onent SD : OK HDMI2 : NG
Comp onent HD : OK
Tool Option 1 816
Tool Option 2 4181
Area Option 40
Option 1 0
Option 2 0
System Con trol
System Con tro l 2
Power Off History
Davinci/Auto Test
Area Option ETC
Lang. Group NTSC-ALL
MODEL : 32LK310
SW VER : V3.04
Mod e : Hom e Use UTT 6
ADC CAL. RGB : NG
RGB: OK HDMI1 : NG
Comp onent SD : OK HDMI2 : NG
Comp onent HD : OK
Tool Option 1 816
Tool Option 2 4181
Area Option 40
Option 1 0
Option 2 0
System Con trol
System Con tro l 2
Power Off History
Davinci/Auto Test
Area Option ETC
Lang. Group NTSC-ALL