background image

7

  

Decide to enter 'Setup’ Menu’ as  ‘Yes’(Enter possible)  or ‘No’(Enter impossible)

Decide to change input source or not by setting 'Input Source Change' as Yes(Change possible) or  

No (Change impossible).

y

y

When ‘Input Source Change’ is set to ‘No’ (Change impossible)

y

»

‘INPUT key’ doesn't work, and Input Source Changing via ‘TV D/A’ key, ‘TV/RADIO’ key aren’t  

 

 

possible (ex. Press TV/RADIO Key in HDMI source to view TV channel)

y

»

User's input (pressing Programme key, numeral key, List key, Q.View key in all Input source  

 

except TV source) doesn't work.

y

»

Entering 'Setup Menu' item in the 'Main Menu OSD' except TV mode doesn't accepted.  

 

Because entering 'Setup Menu' item makes present mode as TV mode even though present  

 

mode is not TV. Change to TV mode isn’t allowed.

y

»

TV set always turns on fixed input  source and volume  information regardless of already  

 

set information.

y

»

Entering 'Setup Menu' except TV mode is impossible  regardless of ‘Programme Change'  

 

or 'Setup Menu' items’ value.

y

»

TV can be only turned on with the input source which is irrelevant from the programme 

 

related information set (volume, input) in ‘On Time’ Menu.

y

»

Auto AV and HDMI-CEC still work regardless of Input Source Change’s value.

y

»

When 'Input Source Change' is set to Yes(Change possible), changing input source is available.

(5-1) Setup Menu

 

(5-2) input Source Change

 

Configure TV function’s limitation. When selected to ‘Yes’, following sub-menus will be worked by below.

  

(5)  Limited Mode

In case of power off condition with all key are blocked, ‘Power On Status’ value turns to ‘PWR’,  

and disabled status to fix value for  power on operation. (fool-proof routine)

Decide to operate 'Local/Front Key'  working behavior by setting ‘Local Key Operation’ as Normal, Use PWR 

Only, Block All. (LX300C series use for only Normal/Block All)

y

y

When 'Local Key Operation' is set to Block All, all local keys don’t work. If value is Use PWR Only, it 

blocks all local keys except power key.

y

y

When 'Local Key Operation' is set to Normal, all local key are available.

(4-2) Local Key Operation

 

Exception)

 

 • 

Power On Status

 • 

Key Management

   • 

IR Operation

   • 

Local Key Operation

◄    

STD    

◄     

Yes     

◄ 

Block All

 

◄ 

Block All

 

 • 

Power On Status

 • 

Key Management

   • 

IR Operation

   • 

Local Key Operation

◄   

PWR   

◄     

Yes     

◄ 

Block All

 

◄ 

Block All

 

Содержание 22LX330C-UA















































Отзывы: