COMMER
CIAL
MODE
SETUP
100
COMMERCIAL MODE SETUP
INSTALLER MENU
Use the Installer’s Menu to set up or change operational settings.
See more detailed descriptions of the Installer menu items on the following pages...
A
Acccceessssiin
ng
g tth
hee IIn
nssttaalllleerr’’ss M
Meen
nu
u
Make sure TV is on. Installer’s menu items can be accessed by using
an installer’s remote control. Just press MENU repeatedly until the TV
seems to stop responding, then press 9, 8, 7, 6, and ENTER to access
the Installer’s menu. To remove the Installer’s menu, press ENTER
again.
Any changes you make will be stored in nonvolatile memory.
The Installer’s menu opens with item 000 INSTALLER SEQ 000. Use
the Up/Down arrow keys to sequence through the available menu
items. Or, access an item directly by keying in the line number, then
pressing MENU. For example, to access the Sleep Timer option which
is item 015, press 0-1-5, then MENU. To change a setting, use the
Left/Right arrow keys. Or, enter a value directly.
U
Ussiin
ng
g tth
hee IIn
nssttaalllleerr’’ss M
Meen
nu
u
Items 000
~
118 are immediately accessible only upon entering the
Installer’s Menu. Their numbers, descriptions, ranges, factory default
settings, and a place for listing any changes made on-site are given
below and on the following pages.
Typical Installer Menu
000 INSTALLER
SEQ
000
UPN 000-000-000-000
FPGA E0F1
PTC V1.00.000
CPU V3.06.00
HOSPITAL PTC INSTALLER MENU