LG 20MT48 Series, Руководство пользователя

Страница: 16 / 29

ENG
ENGLISH
8
Remote control
The descriptions in this manual are based on the buttons on the remote
control. Please read this manual carefully and use the TV correctly.
To replace batteries, open the battery cover, replace batteries
(1.5 V AAA) matching the and ends to the label inside the
compartment, and close the battery cover. To remove the batteries,
perform the installation actions in reverse.
CAUTION
y
Do not mix old and new batteries, as this may damage the
remote control.
y
The remote control will not be included for all sales market.
Make sure to point the remote control toward the remote control
sensor on the TV.
A
(Power)
Turns the TV on or off.
Selects Radio, TV and DTV programme.
Recalls your preferred subtitle in digital mode.
Turns the PIP mode on or off. (Depending on model)
By pressing the AD button, audio descriptions function will be
enabled.
Selects TV or PC mode.
(Inputs) Changes the input source.
B
Number buttons Enters numbers.
Accesses the saved programme list.
Returns to the previously viewed programme.
Adjusts the volume level.
Accesses your favourite programme list.
Shows programme guide.
Mutes all sounds.
Scrolls through the saved programmes.
Moves to the previous or next screen.
hri^Z`^\^_]
A
B
Connecting to a PC
y
Image shown may differ from your TV.
Your TV supports the Plug and Play* feature and has the built-in
speakers with Virtual Surround that reproduces sound clearly with a
rich bass.
* Plug and Play: The function when a PC recognizes a connected device
that users connect to a PC and turn on, without device configuration
or user intervention.
NOTE
y
If you want to use HDMI-PC mode, you must set the Input
Label to PC mode.
y
The
OSD (On Screen Display)
is displayed on the screen as
shown below.
»
When turning the product on in
HDMI
input.
» When switching to HDMI input.
Is the input connected to your PC?
Do not show message again YES NO
y
If you select " YeS " the size and image quality are optimised
for your PC.
y
If you select " NO " the size and image quality are optimised for
the AV device (DVD player, set-top box).
y
If you select " Do not show message again " this message
does not appear until the TV is reset. You can change the set
value in
(Home) Inputs Input Label .
y
The values set for HDMI1/HDMI2 are saved independently.
(Only MT58*)