LG SIGNATURE OLED88Z29LA.AEK Скачать руководство пользователя страница 4

4

Installation

Lifting and moving the TV

Please note the following advice to prevent the TV from being scratched or 
damaged and for safe transportation regardless of its type and size.

 

It is recommended to move the TV in the box or packing material that 
the TV originally came in.

 

Before moving or lifting the TV, disconnect the power cord and all cables.

 

When holding the TV, the screen should face away from you to avoid 
damage.

 

Make sure not to hold the transparent part, speaker, or speaker grill area. 

 

When transporting a large TV, there should be at least 4 people. 

 

When transporting the TV, do not expose the TV to jolts or excessive 
vibration.

 

When transporting the TV, keep the TV upright, never turn the TV on its 
side or tilt towards the left or right.

 

Do not apply excessive pressure to cause flexing / bending of frame 
chassis as it may damage screen.

 

When handling the TV, be careful not to damage the protruding buttons.

 

Avoid touching the screen at all times, as this may result in damage to 
the screen.

 

Please do not pile the stuff up or press strongly the speaker. This may 
result in product damage or degradation. 

Antenna/Cable

Connect the TV to a wall antenna socket with an RF cable (75 Ω).

 

Use a signal splitter to use more than 2 TVs.

 

If the image quality is poor, install a signal amplifier properly to improve 
the image quality.

 

If the image quality is poor with an antenna connected, try to realign the 
antenna in the correct direction.

 

An antenna cable and converter are not supplied.

 

For a location that is not supported with ULTRA HD broadcasting, this TV 
cannot receive ULTRA HD broadcasts directly.

Satellite dish

Connect the TV to a satellite dish to a satellite socket with a satellite RF cable 
(75 Ω). (Depending on model) 

Installation

It is recommended to install the product on the floor.

A

A

A

10 cm 

 

A

 

 

Do not apply foreign substances (oils, lubricants, etc.) to the screw parts 
when assembling the product. (Doing so may damage the product.)

 

If you install the TV on a stand, you need to take actions to prevent the 
product from overturning. Otherwise, the product may fall over, which 
may cause injury.

 

Do not use any unapproved items to ensure the safety and product life 
span.

 

Any damage or injuries caused by using unapproved items are not 
covered by the warranty.

 

Make sure that the screws are inserted correctly and fastened securely. 
(If they are not fastened securely enough, the TV may tilt forward after 
being installed.) Do not use too much force and over tighten the screws; 
otherwise screw may be damaged and not tighten correctly.

Содержание OLED88Z29LA.AEK













Отзывы: