7
Mounting on the Table
1 Lift and tilt the TV into its upright position on a table.
•
Leave a 10 cm (minimum) space from the wall for proper ventilation.
2 Connect the power cord to a wall outlet.
10 cm
10 cm
10 cm
(Depending on model)
•
Do not apply foreign substances (oils, lubricants, etc.) to the screw parts when assembling the product. (Doing so may damage the
product.)
•
If you install the TV on a stand, you need to take actions to prevent the product from overturning. Otherwise, the product may fall
over, which may cause injury.
•
Do not use any unapproved items to ensure the safety and product life span.
•
Any damage or injuries caused by using unapproved items are not covered by the warranty.
•
Make sure that the screws are inserted correctly and fastened securely. (If they are not fastened securely enough, the TV may tilt
forward after being installed.) Do not use too much force and over tighten the screws; otherwise screw may be damaged and not
tighten correctly.
Securing TV to the Wall
1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV.
• If there are bolts inserted at the eye-bolts position, remove the bolts first.
2 Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the
eye-bolts on the rear of the TV.
3 Connect the eye-bolts and wall brackets tightly with a sturdy rope. Make sure to keep the rope
horizontal with the flat surface.
•
Use a platform or cabinet that is strong and large enough to support the TV securely.
•
Brackets, bolts and ropes are not provided. You can obtain additional accessories from your local
dealer.
(Depending on model)
