25
HOW TO USE
ENGLISH
•
The door alarm is enabled by default. To disable
the door alarm, press and hold Door Alarm for
three seconds.
6 Freezer
Indicates the set temperature of the freezer
compartment in Celsius (°C) or Fahrenheit (°F).
The freezer temperature control ranges from
-6°F to 8°F (-21°C to -13°C). The recommended
temperature setting for the freezer compartment
is 0°F (-18°C).
To change the temperature mode from °F to °C
(or vice versa) press and hold the Refrigerator
and Freezer temperature buttons simultaneously
for approximately five seconds. The temperature
indication on the display window switches
between Celsius and Fahrenheit.
7 Fresh Filter
The Fresh Air Filter helps remove odors from the
refrigerator. The Fresh Air Filter has two settings,
Auto and Power(PWR). In Auto mode, the Fresh
Air Filter will cycle on and off in increments of
ten minutes on and 110 minutes off. If set to the
Power(PWR) mode, the Fresh Air Filter will stay
on continuously for four hours, cycling on and off
in increments of ten minutes on and five minutes
off. After four hours, the Fresh Air Filter will
switch back to Auto mode.
•
Press the Fresh Air Filter button once for
Power(PWR) mode.
•
Press the Fresh Air Filter button again to
switch back to Auto mode.
8 Ice Plus
This function increases both ice making and
freezing capabilities.
•
Press Ice Plus to illuminate the icon in the
display and activate the function for 24 hours.
After 24 hours, the icon and the function
automatically turn off.
•
To deactivate the function manually, press Ice
Plus again.
9 Display
The display indicates the current status of the
refrigerator. Press any button to display the
current setting for that function.
•
To turn the display on, open a refrigerator
or freezer door or knock twice on the
InstaView™Door-in-Door® to activate the
interior LED
•
The display turns off automatically five
seconds after all the doors are closed or five
seconds after you have knocked twice on
the InstaView™Door-in-Door®.
•
The display buttons operate using static
electricity. Wear gloves while cleaning to
avoid activating button functions.
•
Keep the display clean and free from foreign
substances. Skin must contact the buttons
directly for them to properly function.
•
Wipe any moisture off the display before
using it. Moisture on the display may
interfere with the functioning of the buttons.
Using the Wi-Fi Eclipse Display
CAUTION
Display Mode (For Store Use Only)
The Display Mode disables all cooling in the
refrigerator and freezer sections to conserve
energy while on display in a retail store. When
you turn on the interior display, “Demo Mode”
appears in the display.
To deactivate / activate:
With InstaView™Door-in-Door® opened, press
and hold the Refrigerator and Ice Plus buttons
at the same time for five seconds. When demo
mode is activated, the control panel will beep
and the temperature settings will display as
“Demo Mode” for five seconds and then return
to normal temperature display. Use the same
procedure to deactivate the Display Mode.
NOTE
The displayed temperature is the
target temperature, and not the actual
temperature of the refrigerator. The
actual refrigerator temperature depends
on the food inside the refrigerator.