5
. Basic Operation
. Making a Call
You can make a call as follows:
. Pick up the handset or press button.
. Listen for dial tone and enter the phone number.
3. Wait for the Auto Time-out or Press button.
4. The call is connected and you may start conversation.
5. To disconnect the call, replace the handset or press
button.
. Redialing Last Number
. Pick up the handset or press
button.
. Listen for dial tone.
3. Press button.
4. The call is connected and you may start conversation.
5. To disconnect the call, replace the handset or press
button.
.3 3-way Call Conferencing
Method 1
. Enter the phone number of the nd party phone while
you are intelephonic conversation with st party.
. Press button. And press buttonagain.
Method 2
. Press button while you are in telephonic
conversation with st party.
. If you listen to the dialing tone, Press the phone
number of thend party phone.
3. Press button.
And press button again.
This service should be provided by your service
provider.
END/PWR
Dial/Flash
Redial/Flash
Redial/Flash
Redial/Flash
Redial/Flash
Redial/Flash
Redial/Flash
.4 Call Wait
. Press button, you may start conversation with called
number.
. Re-press button, you may start conversation with
previous number.
.5 Volume Control
. Press button of navigation while in a call, to
adjust speaker volume.
. Press + ( ) to prevent sound
from yourend during the call. To cancel Mute, Press
again +( ).
3. Press + 4( ) during a call and select
Low or High by pressing button, to adjust
MIC volume.
Up/Down
Menu
Mute/Unmute
Menu
Mute/Unmute
Menu
MIC Level
Up/Down
Basic Operation
B
as
ic
O
pe
ra
tio
n
