LIP-8012D & LIP-8024D User Guide
Issue 1
10
August, 2008
2.2
Using the Speakerphone
Activate the iPECS Speakerphone at any time (except
for Paging) in place of lifting the handset to receive or
place calls.
Additionally, you may switch between the handset and
Speakerphone during a call. By keeping the handset
Off-hook, the
Group Listen
feature is activated, which
provides incoming audio over the speaker with outgoing
audio from the handset. This permits a local ‘group’ to
listen to both sides of the conversation without
interfering with the conversation.
While in a conversation using the Speakerphone,
Mute
the microphone using the M
UTE
button. When Mute is
active, the M
UTE
button LED will be illuminated. To turn
off
Mute
,
press the M
UTE
button again..
With
Auto Speaker Select
, activating or accessing a
feature by pressing its button will activate the
Speakerphone automatically.
When using a Headset, the
SPEAKER
button controls the
ON/OFF-hook state for the phone.
4. MONITOR CONF ROOM
5. DELETE CONF ROOM
BACK OK
Date/Time Set
—Enter mm/dd/yy, and press
OK
Soft
button; enter hh/mm, and press
OK
Soft button.
Set ICM Only Mode
—Dial the Station Range for ICM
only calls (ex., 103-108=103108), and press the
OK
Soft button.
Restore COS
—Dial the Station Range for COS
restoring (ex., 103-108=103108), and press the
OK
Soft button.
Monitor Conference Room
—Enter the Conference
Room number to view the number of attendees in the
Conference Room.
Delete Conference Room
—Enter the Conference
Room number and press the
OK
Soft button to delete.
