Using the supplied 16mm x 2.0 bolts attach the middle braces to the front subframe
loosely. Install the remaining 10mm x 1.5 bolts and washers to the open holes to the
Camaro factory chassis rails and through the last open bolts in the rear subframe brace.
Figure 10:
Front X brace installed.
Slide the X brace into place at the open gap provided by the middle chassis braces. You
will need to insert the two supplied tube nuts are shown in figure 11 below. These will
install from the top and drop into place above the rear mount locations shown in figure
12.
Figure 11:
Frame tube nut inserts
