LIP-8012D/8024D/8040L User Operation
Call Hold: Placing a call in a waiting state
To place a call on Hold:
1. Press
Hold/save
.
Joining Multiple People in a Conference
To establish a Conference:
1. Establish call with one of the desired conference
parties,
2. Select the
Conf
Soft button,
3. Establish call with the other conference party,
4. Select the
Conf
Soft button,
5. Select the
Conf
Soft button again to establish the
conference
.
To place a Conference on Hold:
1. Press the hold/save button.
To retrieve the Conference:
1. Select the
Conf
Soft button.
To make an External-parties-only Conference:
1. Establish conference with two external parties,
2. Select the
Conf
Soft button to exit.
To enter pre-opened Conference Room:
1. Dial
5 9 X
(when X is the conference room number.)
Call log: To review call history of incoming,
outgoing and missed calls. The user can
place a call with the numbers and save
the external call to directory
To enter the CALL LOG menu
1. Press the
LOG
Soft button.
To place call with numbers in CALL LOG menu
1. Press
Navigation UP/DOWN
button to select.
2. Press the
SEND
Soft button.
To save the external call to directory
1. Press
Navigation UP/DOWN
button to select.
2. Press the
SELECT
Soft button.
3. Press the
SAVE
Soft button.
Contrast : LCD contrast can be adjusted.
To change the contrast
1. In the idle state, press
VOLUME UP
or
VOLUME DOWN
button.
If
VOLUME UP
button is pressed, the contrast is
increased (dark).
If
VOLUME DOWN
button is pressed, the contrast is
decreased (bright).
Dual font : T
wo kinds of English font can be
used ; Times New Roman, Gothic.
To change the font
1. Press
MENU
button
2. Press ‘1’ ‘8’.
3. Press
Navigation UP/DOWN
button to select.
4. Press
[OK]
Soft button.
Blue-tooth : blue-tooth headset can be used.
(LIP-8024D and LIP-8040L only)
Optional blue-tooth module has to be mounted.
To enable or disable to use blue-tooth headset
1. Press
[PGM]
+ ‘*’ + ‘9’.
2. Select ON or OFF by dialing 1 or 0.
3. To save the item, press
[SAVE]
button.
To register blue-tooth headset
1. Make blue-tooth headset to register mode.
2. Press
[PGM]
+ ‘*‘ + ‘8’.
3. After searching headset, press
[OK]
.
4. Enter pin code and press
[OK]
.
5. After success pairing, press
[EXIT]
.
To check paired information
1. Press
[PGM]
+ ‘*’ + ‘8’.
2. Select paired information menu by navigation button
and press
[OK]
.
3. Check the information and press
[EXIT]
.
To remove headset paired information
1. Press
[PGM]
+ ‘*’ + ‘9’.
2. Select un-pairing menu by navigation button and
press
[OK]
.
3. To delete paired, press
[OK]
button to make sure.
To retrieve voicemail
1.Press
VSF
Key programed listen to voice prompts
Or dial 633 + extn + password.
For Further enquiries please contact:
All manuals and user guides at all-guides.com
