LG-Ericsson iPecs GDC-500H Скачать руководство пользователя страница 51 | Manualshive

Страница: 51 / 68

LG-Ericsson iPecs GDC-500H Скачать руководство пользователя страница 51

GDC-500H Wireless Handset
User Guide

38

5. Use the Up and Down arrows on the

Navigation

( ) to highlight the desired

record.

6. When the desired record is located, use the directions under “Modifying Records in

the Phonebook” or “Deleting Records from the Phonebook sections.

5.5 Bluetooth

GDC-500H supports a Bluetooth allowing you to use a wireless headset. So you can move
freely around the Handset and maintain a conversation. Before using the headset, the
headset must be “paired” with the Handset, and then the headset must be enabled for use.

Note:

During the pairing operation, the headset and Handset should be as close as

possible but not more than 1 meter apart.

Before searching a headset, the Bluetooth of GDC-500H must be activated by following the
below operation since the default is not activated.

1. Select the Bluetooth menu from the User Menu.
2. Use the

Navigation

( ) button to highlight the Bluetooth selection.

3. Press the

OK

( ) left soft button to access the sub-menu.

4. Use the Up or Down arrow of the

Navigation

( ) button to select the Activation.

5. Use the Left or Light arrow of the

Navigation

( ) button to select Yes.

6. Press the

OK

( ) left soft button to activate the Bluetooth of GDC-500H.

To pair the wireless headset to the Handset:

1. Select the Bluetooth menu from the User Menu.
2. Use the

Navigation

( ) button to highlight the Bluetooth selection.

3. Press the

OK

( ) left soft button to access the sub-menu.

4. Use the Up or Down arrow of the

Navigation

( ) button to select Device Scanning.

5. Press the

OK

( ) left soft button to search the available headset. The message

‘Not Found” is displayed if it failed.

6. The available headsets are displayed and select one. Press the

OK

( ) left soft

button to connect the headset.

7. The ‘Paring done’ message is displayed if it is successful.

To show the status of the headset, delete it, and connect it again:

1. Select the Bluetooth menu from the User Menu.
2. Use the

Navigation

( ) button to highlight the Bluetooth selection.

3. Press the

OK

( ) left soft button to access the sub-menu.

4. Use the Up or Down arrow of the

Navigation

( ) button to select Paired Device.

5. Press the

Option

( ) left soft button to set up the below items.

View : Show information of the headset such as Name and Mac address

Delete : Delete the open list

Connection : connect the headset

6. After finishing the above option, press the End ( ) button.

Note:

GDC-500H supports Bluetooth version 2.1 EDR.

«
...
49
50
51
52
53
...
»

Содержание iPecs GDC-500H





































































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды