7
6.
Remove preassembled finial (B) from harp (C).
Place harp (C) into saddle preassembled on
socket assembly (D). Attach shade (A) and secure
with finial (B).
Install bulb (P).
CAUTION:
When replacing bulb, please
allow bulb to cool down before touching.
Remove preassembled cap from end of power
cord and plug power cord into wall outlet.
NOTE:
Use preassembled switch on socket
assembly (D) to turn lamp ON/OFF.
If light does not function, please refer to
TROUBLESHOOTING on next page.
ASSEMBLY INSTRUCTIONS
7.
5.
Lift one side of shade (A). Slide shade support away
from the center while supporting shade (A) from the
opposite side.
Repeat for other shade support.
5
Shade Support
Shade Frame
7
A
6
Switch
A
B
C
D
P
