3
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or
install the product.
WARNING
To reduce the risk of electric shock or injury, keep electric wires clear of being pinched or cut
during assembly or installation. Discard sets with cut or damaged insulation.
IMPORTANT SAFETY INSTRUCTIONS
When using electrical products, basic precautions should always be followed including the following:
•
READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
•
Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use.
When products are used in outdoor applications, connect the product to a Ground Fault
Circuit Interrupting (GFCI) outlet. lf one is not provided, contact a qualified electrician for
proper installation.
•
This seasonal-use product is not intended for permanent installation or use.
•
Do not mount or place near gas or electric heaters, fireplaces, candles or other similar
sources of heat.
•
Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.
•
Do not let lamps rest on the supply cord or on any wire.
•
Unplug the product when leaving the house, when retiring for the night, or if left unattended.
•
This is an electric product - not a toy! To avoid risk of fire, burns, personal injury and electric
shock, it should not be played with or placed where small children can reach it.
•
Do not use this product for other than its intended use.
•
Do not hang ornaments or other objects from cord, wire or light string.
•
Do not close doors or windows on the product or extension cords as this may damage the
wire insulation.
•
Do not cover the product with cloth, paper or any material not part of the product when in use.
•
This product is equipped with push-in type lamps. Do not twist lamps.
•
This product employs overload protection (fuse). A blown fuse indicates an overload or short-
circuit situation. If the fuse blows, unplug the product from the outlet. Also unplug any additional
strings or products that may be attached to the product. Replace the fuse as per the user servicing
instructions (follow product marking for proper fuse rating) and check the product. lf the
replacement fuse blows, a short-circuit may be present and the product should be discarded.
•
Read and follow all instructions that are on the product or provided with the product.
•
SAVE THESE INSTRUCTIONS.
