4
CAUTION:
f
）
）
）
）
RISK OF FIRE.
Do not replace attachment plug. Contains a safety device
（
fuse
）
that should
not be removed. Discard product if the attachment plug is damaged.
Replace the lamp
1. Grasp plug and removed from the receptacle or other outlet device. Do not
unplug by pulling on cord.
2. Pull lamp and plastic base straight out of lampholder.
3. Replace lamp with only 6 Volt, 0.48 Watt, or 3.5 Volt
，
0.42 Watt (super
bright) type lamp (provided with product).
If the new lamp base does not fit in lampholder, follow the steps below
before step 3.
a) Remove the base of burned out lamp by straightening lamp leads and gently pull lamp out.
b) Thread leads of new lamp through holes in old base with one lead in each hole.
c) After lamp is fully inserted into base, bend each lead up, like other lamps in the light set so that
the leads will not touch the contacts inside the lampholder.
Connecting Sets End to End:
This lighting string is rated 24 Watts (.2 Amps) do not overload. Connect end-to-
end up to a maximum of 210 Watts (1.75 Amps) total. Do not interconnect different
types of products. If connecting to a Lighting decorative product that does not have
a Wattage (W) rating, on the cord tag within 6 inches of the plug, calculate the wattage as follows:
Multiply the current (A), which is also on that cord tag, by 120
For example: A) The decorative product is rated 120V, 60 Hz, 0.2 Amps (rating located on the
cord tag).
B) Wattage = 0.2 x 120 = 24 Watts.
Add the wattage of each lighting string together for a total of 210 Watts or less (Do not exceed 210
Watts).
CAUTION
1. To reduce the risk of overheating, replace burned-out lamps promptly. Use 6 Volt 0.48 Watt or
3.5 Volt
，
0.42 Watt
2. To reduce the risk of fire and electric shock: a) Do not install on trees having needles, leaves or
branch coverings of metal or materials which look like metal, b) Do not mount or support
strings in a manner that can cut or damage wire insulation.
120 Volt. 60 Hz. AC , 0.2A , 24 Watts , MADE IN CHINA
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 5 minutes
No Tools Required for Assembly
