14. Insert the
BLACK
and
WHITE
wires from light kit
assembly (J) through center hole in switch
housing (K). Hold wires taut while installing switch
housing (K) to prevent the wire from twisting. Tighten
light kit assembly (J) onto switch housing (K).
Install previously removed hex nut (Step 13, page 15).
17. Attach switch housing (K) to switch housing cover (I).
Align switch housing (K) holes with switch housing
cover (I) holes. Install previously removed screws
(Step 8, page 14) and tighten securely.
15. Connect the
WHITE
wire to the
WHITE
wire in the
switch housing (K). Connect the
BLACK
wire to the
BLUE
wire in the switch housing (K). Make sure the
wire connectors are secure.
18. Install bulbs (O) into socket.
Note:
This fan has an energy-saving wattage limiter
included. If candelabra-base bulbs are over 190 watts,
light will automatically turn off. Please ensure bulb
wattage is always below 190 watts.
16. Connect the male plug from the motor housing
assembly (H) to the female plug from the switch
housing (K).
WARNING:
To avoid possible fire or shock, the
connectors should not be removed unless a light kit
will be immediately installed and the power should be
turned off prior to the removal light kit.
19. Remove preassembled rubber washer, hex nut
and finial (N) from the light kit assembly (J).
14
Hex nut
K
J
15
16
White
Blue
Black
K
H
K
Male plug
Female plug
FINAL INSTALLATION
FINAL INSTALLATION
16
Lowes.com/harborbreeze
Lowes.com/harborbreeze
17
Lowes.com/harborbreeze
Lowes.com/harborbreeze
17
K
I
18
O
19
J
N
Hex nut
Rubber washer
