8
Align the hook on the back of the mirror (A) with the
receiving bracket on the main body (B). Carefully lower
the hook into the receiving bracket.
WARNING:
Make sure it feels fully seated and secure
before releasing the mirror (A).
Back Light
The touch switch on the front of the mirror is to turn the
back light ON/OFF.
When the back light is powered ON the button color will
glow Blue; when it is in standby mode it will glow Red.
Adjust Brightness of the Back Light
When the back light is powered ON, press and hold the
power button for approximately 3 seconds. The
brightness will scroll up then back down. Take your
finger off the touch button to leave the brightness at the
setting you choose. This brightness setting will be
retained in memory. To adjust the brightness repeat the
above steps.
•
•
•
4.
Install the screw (DD) on bottom sides as shown.
5.
Touch Switch
Hardware Used
Screw
x 1
DD
5
A
DD
4
A
B
ASSEMBLY INSTRUCTIONS
(CONT'D)
OPERATING INSTRUCTIONS