LF Gaming Stealth series, Руководство пользователя, Страница: 16 / 18

16
MAINTENANCE INSTRUCTIONS
Casters, bases and arms can be wiped clean with a damp
cloth. For extra shine, they may be polished with products
specifically formulated for metal, plastics, nylon and fiberglass.
It should be understood that all products with moving parts will
make noise from time to time.
Please note that squeaks and creaks are typical of chairs that
have not been adjusted or serviced for a long time. To help
alleviate the frequency of noises please go through the steps
outlined below:
• The easiest way to alleviate noise is to systematically move
through each moving part and repeatedly adjust it. For
example, unlock the tilt lock paddle and rock in the chair for
several minutes – this will help move the lubrication along the
spring and stop loud squeaks.
• It may be that the plastic finger guard (if applicable) on
your control has shifted and is now rubbing against the
mechanism paddles. Remove the guard and reattach it to
stop the clicking.
• Check and if need be, tighten bolts attaching the seat and
back to the mechanism.
• Gas lifts will squeak if left idle for extended periods of time.
Lifting and lowering your chair, and rotating in your chair a
few times will eliminate these squeaks.
• Check casters and remove any carpet lint, dust or grime.
Check the bottom of the casters for flat spots. This can
occur on chairs that are rarely moved. Replace casters if
necessary.
• Tighten hand wheels attaching arms to mechanism.