
18
Wall-mount instruction
Preparing To Install The Optional Wall Mount Arm (not included)
This LED LCD Monitor can be attached to a wall mounting
arm purchased separately.
Turn the power OFF then disconnect the cables from the LED
LCD Monitor before performing the procedure below.
1. Lay the LED LCD Monitor face down on a soft surface.
2. Push release button and pull stand away from monitor.
3. Remove the stand base.
Attaching The Optional Wall Mount Arm (not supplied)
Follow these steps to finish installing the wall mounting arm:
1.
Place the wall mounting arm onto the back of the LED LCD
monitor. Line up the holes of the arm with the holes in the
back of the monitor.
2.
Insert the 4 screws into the holes and tighten.
3.
Reconnect the cables. Refer to the User’s Guide that came
with the optional wall mounting arm for instructions on
attaching it to the wall.
NOTE
75mmx75mm VESA high hole (n=4), M4, pitch =0.7 mm screw
mounting kit not included.
4mm, 0.7 pitch
threaded holes x 4
75mm x 75mm Screw
Mounting Options
Содержание PLANAR PLL2250MW
Страница 1: ...www planar com USER S GUIDE LED LCD Monitor PLL2250MW...
Страница 7: ...6 Package Overview LED LCD Monitor Stand Base Power Cord HDMI Cable User s Guide...
Страница 10: ...9 Rear View of the Product HDMI input HDMI 19 pin VGA input D Sub 15 pin Audio input Power input AC input...
Страница 22: ...04 2017 Planar a Leyard company Planar a Leyard company Planar a Leyard company 300110001268000...