Leyard Planar LookThru LO55, Руководство изготовителя

Страница: 13 / 23

13 Planar LookThru Fabricator’s Guide 020-1315-00A
No load should be placed on the Display Glass.
Without the Counterweight Plate the Planar LookThru LO55 weighs 59.9lbs (27.2kg), the Planar
LookThru LO55-T weighs 69.5lbs (31.5kg). The Straight Mount Planar LookThru LO55-S weighs 63.5lbs
(28.9kg), and the Planar LookThru LO55-S-T weighs 73.0lbs (33.2kg).
The primary mounting points are on the Display Chassis and at least three out of five of the primary
mounting points must be used when mounting the Planar LookThru display. Ideally, all five should be
used, but when there is no suitable mounting substrate it is permissible to augment the primary
mounting points with the secondary mounting points located on the Electronics Box.
Never use only secondary mounting points. Every installation must use a minimum of 3 primary
mounting points.
Both the primary and secondary mounting points receive M6 threaded mounting screws.
If there is insufficient support on the mounting surface (e.g. the wall studs do not align with the
mounting points) the optional base plate can be used to aid in mounting the Planar LookThru display.
The base plate can be secured to the mounting surface and then the display secured to the mounting
points on the base plate that are aligned with the mounting points on the display.
Any leveling that needs to be done to
align the Display Glass with the rest of
the installation should be done via the
mounting points and/or the Baseplate.
No pressure should be placed on the
glass to move it into position, rather the
Display Chassis and Electronics Box
should be moved to affect the desired
movement in the Display Glass.
Multiple Planar LookThru displays can
be arranged in a tiled installation using
the optional tiling kit.
Standard Design Mounting Points (LO55)
Straight Mount Design Mounting Points (LO55-S)
Portrait corner tile set-up (LO55’s)