Leyard Planar EP Series, Руководство пользователя, Страница: 31 / 89

Operating the Display
Page | 31
EP Series Ultra HD LCD Displays User Guide
020-1350-01A
16.4 Turning the Display Off
With the power on, press the power button on the remote or side control panel to put the LCD
panel in a
standby mode. To turn off power completely, turn the AC switch to ―O‖ or disconnect
the AC power cord from the power outlet.
Note: If there is no signal for a certain period of time, the LCD panel will automatically go into
standby mode.
16.5 Adjusting the Volume
1. Using the remote, press the
VOLUME
- or
VOLUME
+ to increase or decrease the volume.
2. Press the
MUTE
button to temporarily turn off all sound. To restore the sound, press the
MUTE
button again.
Note: The analog audio out is variable. S/PDIF is fixed.
16.6 Selecting the Input Source
Do one of the following:
• Using the remote, press the desired source button (DP1, DP2, HDMI1, HDMI2, HDMI3,
HDMI4, OPS, VGA).
• Press the source button on the display’s keypad. Use the arrow buttons (


) to select
one of the following input sources and press ENTER: DP1, DP2, HDMI1, HDMI2, HDMI3,
HDMI4, OPS, VGA).
Note:
When the display cannot find a source, a ―No signal‖ message will appear.
16.7 Navigating Through the Menus
1. With the power on, press
MENU
. The
INPUT
menu appears.
2. Within the menu, use

, 
,

,

, and
ENTER
to navigate through the menus and
adjust options.
3. Press
MENU
to return to the previous menu. To exit the menu system, press
EXIT
.