Lexus RCF 2022, Руководство пользователя

Страница: 78 / 412

76
2-1. Instrument cluster
RC F Owner's Manual
• After start: Displays elapsed time since
engine start

Distance
• Driving range: Displays driving range
with remaining fuel
*3, 4
• After start: Displays drive distance since
vehicle start
 Other
Blank: No item
*1
: Resetting:

P.75
*2
: Use the displayed fuel consumption as a
reference.
*3
: When only a small amount of fuel is
added to the tank, the display may not
be updated.
When refueling, turn the engine switch
off. If the vehicle is refueled without
turning the engine switch off, the display
may not be updated.
*4
: This distance is computed based on
your average fuel consumption. As a
result, the actual distance that can be
driven may differ from that displayed.
■
Eco Driving Indicator
During Eco-friendly acceleration (Eco
driving), the Eco Driving Indicator
Light will turn on.
When the acceleration exceeds the
Zone of Eco driving, or when the vehi-
cle is stopped, the light turns off.
Eco Driving Indicator will not operate
under the following conditions:
 The shift lever is in any position
other than D.

A paddle shift switch is operated.
 Neither normal mode nor Eco drive
mode is selected. (

P.192)

The vehicle speed is approximately
80 mph (130 km/h) or higher.
■
Tire pressure

P.273
■
Gear positions
Displays the current gear position
when the shift lever is in D or M.
■
Vehicle sway warning
Detects the sway of the vehicle within a
lane, which is often associated with a
decrease in the driver’s attention level,
and displays the decrease in attention
using a bar display.
The shorter the bar length, the more
the driver may need to rest.
This display is a part of the LDA (Lane
Departure Alert with steering control) sys-
tem. The display is enabled when the oper-
ating conditions of the vehicle sway
warning are met. (

P.165)
■
Units
The units of measure used can be
changed while driving.
Unlike the units setting performed on ,
the units setting performed on can be
changed while driving.
■
Blank (No items)
Displays no drive information contents.