Settings that can be customized by:
Using the
Display Audio system
Dealer
4
Dealer
only
Dealer
only
Dealer
only
Dealer
only
Dealer
only
Dealer
only
Dealer
only
Dealer
only
Door Lock Settings
1. Automatic Door Lock
The automatic door locks can be programmed as follows:
□
The doors automatically lock when the vehicle speed is 12 mph or higher = By speed
□
The doors automatically lock when the vehicle is taken out of Park and shifted into another
range (Standard) = By shift from P
□
The doors will not automatically lock = Off
2. Automatic Door Unlock
The automatic door locks can be programmed as follows:
□
The doors automatically unlock when the vehicle is shifted into Park (Standard) =
By shift to P
□
All the doors automatically unlock when the driver door is opened = By driver door
□
The doors will not automatically unlock = Off
3. Remote 2-Press Unlock
When using the electronic key to unlock the doors:
□
Pressing the unlock button one time unlocks the driver door and two times unlocks all
doors (Standard) = On
□
Pressing the unlock button one time will unlock all doors = Off
4. Select Doors to Unlock
When using Smart Access to unlock the doors:
□
Gripping the driver door handle will unlock all doors = All doors
□
Gripping the driver door handle will unlock the driver’s door (Standard) = Driver’s door
5. Auto Re-lock Timer
When the doors are unlocked and not opened:
□
They will automatically re-lock in 120 seconds
□
They will automatically re-lock in 60 seconds (Standard)
□
They will automatically re-lock in 30 seconds
□
They will not re-lock = Off
6. Lock/Unlock Feedback - Lights
When the lock or unlock button on the electronic key is pressed:
□
Lock button makes lights flash once/Unlock button makes lights flash twice (Standard) = On
□
Lights will not flash = Off
7. Lock/Unlock Feedback - Tone
When the lock button is pressed on the electronic key, the system volume can be
programmed as follows:
Climate Settings
8. Seat Heater Setting*
When seat heater timer control is selected:
□
The intensity of the seat heater will automatically change from HI-MID-LOW depending on
the temperature inside the cabin = Timer
□
The seat heater intensity will not automatically adjust (Standard) = Manual
* If equipped.
9. Smog Sensor Sensitivity
When in AUTO recirculation mode, the sensor will determine when to switch from outside
air to recirculated air based on outside air quality:
10. Auto A/C Mode
When Auto A/C is selected:
□
It will automatically engage the air conditioner compressor to reach the set temperature
(Standard) = On
□
It will automatically achieve a set temperature, warm or cool, without engaging the air
conditioner compressor
*
= Off
*The AC compressor will be engaged when the Auto AC button is pressed a second time
Light Settings
11. Headlamps-On Sensitivity
The front headlights can be programmed to turn On under varying degrees of ambient light
conditions (headlight switch must be in Auto mode):
Light Settings (cont’d)
12. Headlights Auto-Off Timer
When the ignition is turned off and all the doors are closed (headlight switch must be in Auto
mode):
□
The headlights will turn off in 90 seconds
□
The headlights will turn off in 60 seconds
□
The headlights will turn off in 30 seconds (Standard)
□
The headlights will turn off immediately when the vehicle is turned off and the driver door
is opened
13. Daytime Running Lights
Illumination of daytime running lights:
□
On (Standard)
□
Off
14. Interior Lights Off Timer
The interior lights can be adjusted to stay on after closing the door as follows:
□
30 seconds
□
15 seconds (Standard)
□
7.5 seconds
□
Off
15. Exterior Lights Off Timer
After closing the door, the exterior lights can be adjusted to stay on as follows:
□
30 seconds
□
15 seconds (Standard)
□
7.5 seconds
□
OFF
Programmable by Dealer Only
16. Access System with Electronic Key
Unlock the doors with:
□
Electronic key unlock button (This deactivates Smart Access) = Off
□
Smart Access (touch door handle) or electronic key (Standard) = On
17. Door Lock Buzzer
When the lock button on the electronic key is pressed and a door is not fully closed:
□
The buzzer will sound (Standard) = On
□
The buzzer will not sound = Off
18. Panic Mode
When pressing the panic button on the electronic key:
□
The alarm will sound intermittently and the vehicle lights will flash (Standard) = On
□
The alarm will not sound and the vehicle lights will not flash = Off
19. Opening the Trunk
Pressing the trunk release button on the electronic key will open open the trunk. The button
can be programmed as follows:
□
Press button one time to release the trunk (No delay)
□
Press button two times to release the trunk
□
Press and hold button for 0.8 seconds to release the trunk (Standard)
□
Press and hold button for 2 seconds to release the trunk
□
The button can be turned off so the trunk cannot be opened using the electronic key
Programmable by Dealer Only (cont’d)
20. Unlock on Second Key Turn
When using the mechanical key to unlock the doors:
□
Turning the key one time unlocks the driver door, and two times unlocks all doors
(Standard) = On
□
Turning the key one time will unlock all doors = Off
21. Trunk Link with Door Lock
When using the electronic key to lock/unlock both doors, the trunk can be programmed
as follows:
□
The trunk will lock/unlock (Standard) = On
□
The trunk will not lock/unlock = Off
22. Close Windows and Moon Roof with Mechanical Key
When using the mechanical key to operate windows:
□
Turning the key right and holding the position for 2 seconds will not close the windows
and moon roof (Standard) = Off
□ T
urning the key right and holding the position for 2 seconds will close the windows
and moon roof = On
* If equipped
23. Open Windows and Moon Roof with Mechanical Key
When using the mechanical key to operate windows:
□
Turning the key left and holding the position for 2 seconds will not open the windows and
moonroof (Standard) = Off
□
Turning the key left and holding the position for 2 seconds will open the windows and
moonroof = On
* If equipped
24. Open Windows and Moon Roof with Electronic Key
When pressing the unlock button on the electronic key for 3 seconds:
□
The windows and moon roof will not open (Standard) = Off
□
All the windows and moon roof will open = On
* If equipped
25. Illumination of the Interior Cabin Light when Unlocking Door
When using the electronic or mechanical key to unlock the door, the interior cabin light
can be programmed as follows:
□
The cabin light will illuminate (Standard) = On
□
The cabin light will not illuminate = Off
26. Illumination of the Interior Cabin Light when Approaching the Vehicle
When approaching the vehicle with the electronic key, the interior cabin light can be
programmed
as follows:
□
The cabin light will illuminate (Standard) = On
□
The cabin light will not illuminate = Off
27. Illumination of the Outer Foot Lights when Approaching the Vehicle
When approaching the vehicle with the electronic key, the outer foot lights can be
programmed
as follows:
□
The outer foot lights will illuminate (Standard) = On
□
The outer foot lights will not illuminate = Off
Programmable by Dealer Only (cont’d)
28. Illumination of the Outer Foot Lights when Unlocking the Door
When using the electronic key to unlock the door, the outer foot lights can be programmed as
follows:
□
The foot lights will illuminate (Standard) = On
□
The foot lights will not illuminate = Off
29. Interior Light
The interior light will illuminate when POWER is switched to Off:
□
On (Standard)
□
Off
30. Fading of the Outer Foot Lights
The outer foot lights will fade out as they turn off:
□
On (Standard) = On
□
Off
31. Speed Linked Driver Seat Belt Reminder
When the vehicle reaches 12 mph:
□
The driver seat belt buzzer will sound (Standard) = On
□
The driver seat belt buzzer will not sound = Off
32. Speed Linked Passenger Seat Belt Reminder
When the vehicle reaches 12 mph:
□
The passenger seat belt buzzer will sound (Standard) = On
□
The passenger seat belt buzzer will not sound = Off
33. Lane Change Flasher Volume
The interior volume of turn signals can be programmed as follows:
□
Medium (Standard)
□
Soft
□
Loud
34. Rear Cross Traffic Alert Function*
The blind spot monitor rear cross traffic alert function can be programmed as follows:
□
On (Standard) = On
□
Off = Off
* If equipped
